Well, you've got about 8 error messages in a row, take your pick. I think I threw mine out.
_________________________ Life will be better once the Republicans move to Mars. _________________________ FIRE TRUMP! On Fri, Apr 3, 2026, 10:49 AM Patrick <[email protected]> wrote: > Hello ! Anybody got Xwindows ok on Rockpro64 board ? > OK headless, but console remains blank (/etc/boot.conf set tty fb0 errs > not console device). > I enabled xenodm in /etc/rc.conf.local, got errors > > xenodm info (pid 64431): Starting > xenodm info (pid 64431): Starting X server on :0 > ... > (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" > MESA-LOADER: failed to retrieve device information > MESA-LOADER: failed to retrieve device information > MESA-LOADER: failed to retrieve device information > kmsro: driver missing > Failed to create /root/.cache for shader cache (Permission > denied)---disabling. > Failed to create /root/.cache for shader cache (Permission > denied)---disabling. > xenodm info (pid 84620): consolePath: ttyC4 > xenodm info (pid 84620): sourcing /etc/X11/xenodm/Xsetup_0 > > I upgraded uboot ontps spi using Debian's, see new version reflected in > dmesg, but screen remains blank. > Am still using the OpenBSD dtb packaged dtb file on the sdcard boot > partition ... > > Any advice much appreciated ! I discovered rkdrm code in cvs source for > rockpro64 and believe somebody has it working ! > > --- > OpenBSD 7.8 (GENERIC.MP) #38: Sun Oct 12 18:23:44 MDT 2025 > [email protected]:/usr/src/sys/arch/arm64/compile/GENERIC.MP > real mem = 4123766784 (3932MB) > avail mem = 3912044544 (3730MB) > random: good seed from bootblocks > mainbus0 at root: Pine64 RockPro64 v2.1 > psci0 at mainbus0: PSCI 1.1, SMCCC 1.5, SYSTEM_SUSPEND > efi0 at mainbus0: UEFI 2.10 > efi0: Das U-Boot rev 0x20250100 > smbios0 at efi0: SMBIOS 3.7.0 > smbios0: vendor U-Boot version "2025.01-3.1" date 01/01/2025 > smbios0: Pine64 RockPro64 > cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4 > cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu0: 512KB 64b/line 16-way L2 cache > cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16 > cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4 > cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu1: 512KB 64b/line 16-way L2 cache > cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4 > cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu2: 512KB 64b/line 16-way L2 cache > cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4 > cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu3: 512KB 64b/line 16-way L2 cache > cpu4 at mainbus0 mpidr 100: ARM Cortex-A72 r0p2 > cpu4: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache > cpu4: 1024KB 64b/line 16-way L2 cache > cpu4: mismatched ID_AA64MMFR0_EL1 > cpu4: CRC32,SHA2,SHA1,AES+PMULL,ASID16 > cpu5 at mainbus0 mpidr 101: ARM Cortex-A72 r0p2 > cpu5: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache > cpu5: 1024KB 64b/line 16-way L2 cache > apm0 at mainbus0 > agintc0 at mainbus0 sec shift 3:3 nirq 288 nredist 6 ipi 0: > "interrupt-controller" > agintcmsi0 at agintc0 > syscon0 at mainbus0: "qos" > syscon1 at mainbus0: "qos" > syscon2 at mainbus0: "qos" > syscon3 at mainbus0: "qos" > syscon4 at mainbus0: "qos" > syscon5 at mainbus0: "qos" > syscon6 at mainbus0: "qos" > syscon7 at mainbus0: "qos" > syscon8 at mainbus0: "qos" > syscon9 at mainbus0: "qos" > syscon10 at mainbus0: "qos" > syscon11 at mainbus0: "qos" > syscon12 at mainbus0: "qos" > syscon13 at mainbus0: "qos" > syscon14 at mainbus0: "qos" > syscon15 at mainbus0: "qos" > syscon16 at mainbus0: "qos" > syscon17 at mainbus0: "qos" > syscon18 at mainbus0: "qos" > syscon19 at mainbus0: "qos" > syscon20 at mainbus0: "qos" > syscon21 at mainbus0: "qos" > syscon22 at mainbus0: "qos" > syscon23 at mainbus0: "qos" > syscon24 at mainbus0: "qos" > syscon25 at mainbus0: "power-management" > "power-controller" at syscon25 not configured > syscon26 at mainbus0: "syscon" > "io-domains" at syscon26 not configured > rkclock0 at mainbus0 > rkclock1 at mainbus0 > rkclock_set_frequency(rkclock1, 237, 400000000) > syscon27 at mainbus0: "syscon" > rkusbphy0 at syscon27: phy 0 > rkusbphy1 at syscon27: phy 1 > "io-domains" at syscon27 not configured > rkemmcphy0 at syscon27 > "pcie-phy" at syscon27 not configured > rktcphy0 at mainbus0 > rktcphy1 at mainbus0 > rkpinctrl0 at mainbus0: "pinctrl" > rkgpio0 at rkpinctrl0 > rkgpio1 at rkpinctrl0 > rkgpio2 at rkpinctrl0 > rkgpio3 at rkpinctrl0 > rkgpio4 at rkpinctrl0 > pwmreg0 at mainbus0 > syscon28 at mainbus0: "syscon" > syscon29 at mainbus0: "syscon" > rkdrm0 at mainbus0 > drm0 at rkdrm0 > "memory-controller" at mainbus0 not configured > "pmu_a53" at mainbus0 not configured > "pmu_a72" at mainbus0 not configured > agtimer0 at mainbus0: 24000 kHz > "xin24m" at mainbus0 not configured > rkpcie0 at mainbus0 > rkpcie0: link training timeout > dwge0 at mainbus0: rev 0x35, address fa:d4:66:36:e8:d3 > rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211, rev. 6 > dwmmc0 at mainbus0: 50 MHz base clock > sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma > dwmmc1 at mainbus0: 50 MHz base clock > sdmmc1 at dwmmc1: 4-bit, sd high-speed, dma > sdhc0 at mainbus0 > sdhc0: SDHC 3.00, 200 MHz base clock > sdmmc2 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma > ehci0 at mainbus0 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ohci0 at mainbus0: version 1.0 > ehci1 at mainbus0 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ohci1 at mainbus0: version 1.0 > "debug" at mainbus0 not configured > "debug" at mainbus0 not configured > "debug" at mainbus0 not configured > "debug" at mainbus0 not configured > "debug" at mainbus0 not configured > "debug" at mainbus0 not configured > rkdwusb0 at mainbus0: "usb" > xhci0 at rkdwusb0, xHCI 1.10 > usb2 at xhci0: USB revision 3.0 > uhub2 at usb2 configuration 1 interface 0 "Generic xHCI root hub" rev > 3.00/1.00 addr 1 > rkdwusb1 at mainbus0: "usb" > xhci1 at rkdwusb1, xHCI 1.10 > usb3 at xhci1: USB revision 3.0 > uhub3 at usb3 configuration 1 interface 0 "Generic xHCI root hub" rev > 3.00/1.00 addr 1 > "saradc" at mainbus0 not configured > rkrng0 at mainbus0: ver 1 > rkrng1 at mainbus0: ver 1 > rkiic0 at mainbus0 > iic0 at rkiic0 > escodec0 at iic0 addr 0x11 > rkiic1 at mainbus0 > iic1 at rkiic1 > com0 at mainbus0: dw16550, 64 byte fifo > com1 at mainbus0: dw16550, 64 byte fifo > com1: console > rkspi0 at mainbus0 > rktemp0 at mainbus0 > rkiic2 at mainbus0 > iic2 at rkiic2 > rkpmic0 at iic2 addr 0x1b: RK808 > fanpwr0 at iic2 addr 0x40: SYR827, 1.00 VDC > fanpwr1 at iic2 addr 0x41: SYR828, 1.00 VDC > rkiic3 at mainbus0 > iic3 at rkiic3 > fusbtc0 at iic3 addr 0x22 > rkpwm0 at mainbus0 > rkpwm1 at mainbus0 > rkpwm2 at mainbus0 > "dfi" at mainbus0 not configured > "video-codec" at mainbus0 not configured > "iommu" at mainbus0 not configured > "video-codec" at mainbus0 not configured > "iommu" at mainbus0 not configured > "rga" at mainbus0 not configured > "efuse" at mainbus0 not configured > "dma-controller" at mainbus0 not configured > "dma-controller" at mainbus0 not configured > "watchdog" at mainbus0 not configured > "rktimer" at mainbus0 not configured > rkiis0 at mainbus0 > rkiis1 at mainbus0 > rkiis2 at mainbus0 > rkvop0 at mainbus0: RK3399 VOPL > "iommu" at mainbus0 not configured > rkvop1 at mainbus0: RK3399 VOPB > "iommu" at mainbus0 not configured > "iommu" at mainbus0 not configured > "iommu" at mainbus0 not configured > simpleaudio0 at mainbus0 > rkdwhdmi0 at mainbus0: HDMI TX > rkdwhdmi0: version 2.11a, phytype 0xf3 > "gpu" at mainbus0 not configured > "opp-table-0" at mainbus0 not configured > "opp-table-1" at mainbus0 not configured > "opp-table-2" at mainbus0 not configured > "external-gmac-clock" at mainbus0 not configured > gpiokeys0 at mainbus0: "GPIO Key Power" > "ir-receiver" at mainbus0 not configured > gpioleds0 at mainbus0: "work", "diy" > pwmfan0 at mainbus0 > "sdio-pwrseq" at mainbus0 not configured > graphaudio0 at mainbus0 > graphaudio1 at mainbus0 > "spdif-dit" at mainbus0 not configured > "avdd-regulator" at mainbus0 not configured > "vcc12v-dcin" at mainbus0 not configured > "vcc1v8-s3" at mainbus0 not configured > "vcc3v0-sd" at mainbus0 not configured > "vcc3v3-pcie-regulator" at mainbus0 not configured > "vcc3v3-sys" at mainbus0 not configured > "vcc5v0-host-regulator" at mainbus0 not configured > "vcc5v0-typec-regulator" at mainbus0 not configured > "vcc5v0-sys" at mainbus0 not configured > "vcc5v0-usb" at mainbus0 not configured > "binman" at mainbus0 not configured > "smbios" at mainbus0 not configured > usb4 at ohci0: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > usb5 at ohci1: USB revision 1.0 > uhub5 at usb5 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > audio0 at graphaudio0 > fusbtc0: attached (source) > fusbtc0: connected in host mode > sdmmc0: can't enable card > scsibus0 at sdmmc1: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SDU32, 0010> removable > sd0: 30255MB, 512 bytes/sector, 61962240 sectors > sdmmc2: can't enable card > uhub6 at uhub0 port 1 configuration 1 interface 0 "Genesys Logic USB2.0 > Hub" rev 2.00/7.02 addr 2 > uhub6: device problem, disabling port 1 > uhidev0 at uhub6 port 3 configuration 1 interface 0 "PixArt Dell MS116 USB > Optical Mouse" rev 2.00/1.00 addr 3 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhidev1 at uhub6 port 4 configuration 1 interface 0 "Dell Dell KB216 Wired > Keyboard" rev 2.00/33.11 addr 4 > uhidev1: iclass 3/1 > ukbd0 at uhidev1: 8 variable keys, 6 key codes > wskbd0 at ukbd0 mux 1 > uhidev2 at uhub6 port 4 configuration 1 interface 1 "Dell Dell KB216 Wired > Keyboard" rev 2.00/33.11 addr 4 > uhidev2: iclass 3/0, 5 report ids > uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0 > ucc0 at uhidev2 reportid 2: 573 usages, 20 keys, array > wskbd1 at ucc0 mux 1 > uhid1 at uhidev2 reportid 5: input=0, output=0, feature=5 > run0 at uhub2 port 1 configuration 1 interface 0 "Ralink 802.11 g WLAN" > rev 2.00/1.01 addr 2 > run0: MAC/BBP RT3070 (rev 0x0201), RF RT2020 (MIMO 1T1R), address > 00:b0:8c:0a:81:06 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on sd0a (7454a185fb9a9f9c.a) swap on sd0b dump on sd0b > WARNING: bad clock chip time > WARNING: CHECK AND RESET THE DATE! > rkvop0: using CRTC 0 for RK3399 VOPL > rkvop1: using CRTC 1 for RK3399 VOPB > drm:pid0:drm_fb_helper_find_format *WARNING* [drm] format 0x34325258 not > supported > drm:pid0:drm_fb_helper_find_format *WARNING* [drm] format 0x34325258 not > supported > drm:pid0:__drm_fb_helper_find_sizes *WARNING* [drm] No compatible format > found > rkdrm0: 1920x1080, 32bpp > wsdisplay0 at rkdrm0 mux 1 > wskbd0: connecting to wsdisplay0 > wskbd1: connecting to wsdisplay0 > wsdisplay0: screen 0-5 added (std, vt100 emulation) > "framebuffer" at mainbus0 not configured > > >
