Hi, I am wondering why the rkdrm driver emmits this message on rk3566:
> rkdrm0: no display interface ports configured And if there is anything one can try or do to enable support / help to make it supported. Regards, --ext --Z-- 2024. aug. 15. 21:24:04 Mizsei Zoltán <[email protected]>: > Hi! > > Mainline U-Boot support is expected in U-Boot 2024.10 (see patches here: > https://lore.kernel.org/u-boot/[email protected]/ ), > already available in > https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/tags/u-boot-rockchip-20240812 > > Linux support expected in 6.11 : > https://lore.kernel.org/linux-devicetree/[email protected]/ > > Board description: > The Radxa ZERO 3W/3E is an ultra-small, high-performance single board > computer based on the Rockchip RK3566, with a compact form factor and > rich interfaces. > > Docs: https://docs.radxa.com/en/zero/zero3 > Keep in mind: the board is built with 2 different wlan chip, the earlier > models have AP6212 but the later models sports AIC8800. > > EDK2 available here: https://github.com/jaredmcneill/quartz64_uefi/ > > Test results: booting using EDK2 results working X11, but the eMMC will not > work, however with U-Boot eMMC supported, but starting Xorg fails. Isn't it > supposed to work using rkdrm? > > Bootlog using E-Boot: > > BSD.RD: > > U-Boot 2024.10-rc2 (Aug 15 2024 - 20:05:16 +0200) > > > > Model: Radxa ZERO 3W > DRAM: 8 GiB (effective 7.7 GiB) > PMIC: RK817 (on=0x40, off=0x00) > Core: 299 devices, 28 uclasses, devicetree: separate > MMC: mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0 > Loading Environment from nowhere... OK > In: serial@fe660000 > Out: serial@fe660000 > Err: serial@fe660000 > Model: Radxa ZERO 3W > Net: No ethernet found. > Hit any key to stop autoboot: 0 > Scanning for bootflows in all bootdevs > Seq Method State Uclass Part Name Filename > --- ----------- ------ -------- ---- ------------------------ > ---------------- > Scanning global bootmeth 'efi_mgr': > Card did not respond to voltage select! : -110 > No EFI system partition > No EFI system partition > Failed to persist EFI variables > No EFI system partition > Failed to persist EFI variables > No EFI system partition > Failed to persist EFI variables > No EFI system partition > Failed to persist EFI variables > No EFI system partition > Failed to persist EFI variables > 0 efi_mgr ready (none) 0 <NULL> > ** Booting bootflow '<NULL>' with efi_mgr > Booting: mmc 1 > disks: sd0* sd1 >>> OpenBSD/arm64 BOOTAA64 1.20 > boot> > cannot open sd0a:/etc/random.seed: No such file or directory > booting sd0a:/bsd: 3054228+1248332+12713448+634064 > [271894+91+707976+290174]=0x13f0f38 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org > > OpenBSD 7.6-beta (RAMDISK) #146: Tue Aug 13 15:23:31 MDT 2024 > [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/RAMDISK > real mem = 8317743104 (7932MB) > avail mem = 7976288256 (7606MB) > random: good seed from bootblocks > mainbus0 at root: Radxa ZERO 3W > psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND > efi0 at mainbus0: UEFI 2.10 > efi0: Das U-Boot rev 0x20241000 > smbios0 at efi0: SMBIOS 3.7.0 > smbios0: vendor U-Boot version "2024.10-rc2" date 10/01/2024 > smbios0: radxa Radxa ZERO 3W > cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0 > cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu0: 512KB 64b/line 16-way L2 cache > cpu0: > DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,AdvSIMD+HP,FP+HP,SSBS > scmi0 at mainbus0: SCMI 2.0 > agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4: "interrupt-controller" > syscon0 at mainbus0: "syscon" > rkiovd0 at syscon0 > syscon1 at mainbus0: "syscon" > syscon2 at mainbus0: "syscon" > syscon3 at mainbus0: "syscon" > syscon4 at mainbus0: "syscon" > syscon5 at mainbus0: "syscon" > syscon6 at mainbus0: "syscon" > rkclock0 at mainbus0: PMUCRU > rkclock1 at mainbus0: CRU > syscon7 at mainbus0: "power-management" > "power-controller" at syscon7 not configured > syscon8 at mainbus0: "qos" > syscon9 at mainbus0: "qos" > syscon10 at mainbus0: "qos" > syscon11 at mainbus0: "qos" > syscon12 at mainbus0: "qos" > syscon13 at mainbus0: "qos" > syscon14 at mainbus0: "qos" > syscon15 at mainbus0: "qos" > syscon16 at mainbus0: "qos" > syscon17 at mainbus0: "qos" > syscon18 at mainbus0: "qos" > syscon19 at mainbus0: "qos" > syscon20 at mainbus0: "qos" > syscon21 at mainbus0: "qos" > syscon22 at mainbus0: "qos" > syscon23 at mainbus0: "qos" > syscon24 at mainbus0: "qos" > syscon25 at mainbus0: "qos" > syscon26 at mainbus0: "qos" > syscon27 at mainbus0: "qos" > syscon28 at mainbus0: "qos" > syscon29 at mainbus0: "qos" > syscon30 at mainbus0: "qos" > syscon31 at mainbus0: "qos" > rkcomphy0 at mainbus0 > rkusbphy0 at mainbus0: phy 0 > rkpinctrl0 at mainbus0: "pinctrl" > rkgpio0 at rkpinctrl0 > rkgpio1 at rkpinctrl0 > rkgpio2 at rkpinctrl0 > rkgpio3 at rkpinctrl0 > rkgpio4 at rkpinctrl0 > "fit-images" at mainbus0 not configured > "l3-cache" at mainbus0 not configured > "opp-table-0" at mainbus0 not configured > "display-subsystem" at mainbus0 not configured > "firmware" at mainbus0 not configured > "opp-table-1" at mainbus0 not configured > "hdmi-sound" at mainbus0 not configured > "pmu" at mainbus0 not configured > agtimer0 at mainbus0: 24000 kHz > "xin24m" at mainbus0 not configured > "xin32k" at mainbus0 not configured > "sram" at mainbus0 not configured > xhci0 at mainbus0, xHCI 1.10 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev > 3.00/1.00 addr 1 > xhci1 at mainbus0, xHCI 1.10 > usb1 at xhci1: USB revision 3.0 > uhub1 at usb1 configuration 1 interface 0 "Generic xHCI root hub" rev > 3.00/1.00 addr 1 > rkiic0 at mainbus0 > iic0 at rkiic0 > rkpmic0 at iic0 addr 0x20: RK817 > "rockchip,rk8600" at iic0 addr 0x40 not configured > "gpu" at mainbus0 not configured > "video-codec" at mainbus0 not configured > "iommu" at mainbus0 not configured > "rga" at mainbus0 not configured > "video-codec" at mainbus0 not configured > "iommu" at mainbus0 not configured > "vop" at mainbus0 not configured > "iommu" at mainbus0 not configured > "hdmi" at mainbus0 not configured > "dfi" at mainbus0 not configured > dwmmc0 at mainbus0: 50 MHz base clock > sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma > dwmmc1 at mainbus0: 50 MHz base clock > sdmmc1 at dwmmc1: 4-bit, sd high-speed, dma > dwmshc0 at mainbus0 > dwmshc0: SDHC 4.20, 200 MHz base clock > sdmmc2 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma > "i2s" at mainbus0 not configured > "dma-controller" at mainbus0 not configured > "dma-controller" at mainbus0 not configured > "watchdog" at mainbus0 not configured > com0 at mainbus0: dw16550, 64 byte fifo > com1 at mainbus0: dw16550, 64 byte fifo > com1: console > "tsadc" at mainbus0 not configured > "saradc" at mainbus0 not configured > "hdmi-con" at mainbus0 not configured > "leds" at mainbus0 not configured > "regulator-1v8-vcc" at mainbus0 not configured > "regulator-1v8-vcca" at mainbus0 not configured > "regulator-1v8-vcca-image" at mainbus0 not configured > "regulator-3v3-vcc" at mainbus0 not configured > "regulator-5v0-vcc-sys" at mainbus0 not configured > "sdio-pwrseq" at mainbus0 not configured > "binman" at mainbus0 not configured > "dmc" at mainbus0 not configured > rkrng0 at mainbus0: ver 2 > "nvmem" at mainbus0 not configured > scsibus0 at sdmmc0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SD/MMC, NCard, 0010> removable > sd0: 14910MB, 512 bytes/sector, 30535680 sectors > manufacturer 0xc8a1, product 0x0082 at sdmmc1 function 1 not configured > manufacturer 0xc8a1, product 0x0082 at sdmmc1 function 2 not configured > scsibus1 at sdmmc2: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <Samsung, CUTB42, 0000> > sd1: 59640MB, 512 bytes/sector, 122142720 sectors > softraid0 at root > scsibus2 at softraid0: 256 targets > root on rd0a swap on rd0b dump on rd0b > WARNING: bad clock chip time > WARNING: CHECK AND RESET THE DATE! > cpu0: regulator not implemented > erase ^?, werase ^W, kill ^U, intr ^C, status ^T > > Welcome to the OpenBSD/arm64 7.6 installation program. > (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? i > At any prompt except password prompts you can escape to a shell by > typing '!'. Default answers are shown in []'s and are selected by > pressing RETURN. You can exit this program at any time by pressing > Control-C, but this can leave your system in an inconsistent state. > > Terminal type? [vt220] > System hostname? (short form, e.g. 'foo') zero > > DNS domain name? (e.g. 'example.com') [my.domain] > DNS nameservers? (IP address list or 'none') [none] > > Password for root account? (will not echo) > Password for root account? (again) > Start sshd(8) by default? [yes] > Setup a user? (enter a lower-case loginname, or 'no') [no] szilard > Full name for user szilard? [szilard] > Password for user szilard? (will not echo) > Password for user szilard? (again) > WARNING: root is targeted by password guessing attacks, pubkeys are safer. > Allow root ssh login? (yes, no, prohibit-password) [no] no > > Available disks are: sd0 sd1. > Which disk is the root disk? ('?' for details) [sd0] ? > sd0: SD/MMC, NCard, 0010 (14.6G) > sd1: Samsung, CUTB42, 0000 (58.2G) > Available disks are: sd0 sd1. > Which disk is the root disk? ('?' for details) [sd0] sd1 > Encrypt the root disk with a (p)assphrase or (k)eydisk? [no] no > Disk: sd1 Usable LBA: 16 to 122142704 [122142720 Sectors] > #: type [ start: size ] > ------------------------------------------------------------------------ > 0: Microsoft basic data [ 64: 32768 ] > 1: NetBSD [ 32832: 33554432 ] > 2: 49f48d32-b10e-11dc-b99b-0019d1879648 [ 33587264: 16777216 ] > 3: NetBSD [ 50364480: 67108864 ] > Use (W)hole disk or (E)dit the GPT? [whole] > Creating a msdos partition and an OpenBSD partition for rest of sd1...done. > The auto-allocated layout for sd1 is: > # size offset fstype [fsize bsize cpg] > a: 1024.0M 32832 4.2BSD 2048 16384 1 # / > b: 4889.4M 2129984 swap > c: 59640.0M 0 unused > d: 3967.5M 12143488 4.2BSD 2048 16384 1 # /tmp > e: 6332.2M 20268928 4.2BSD 2048 16384 1 # /var > f: 6309.4M 33237280 4.2BSD 2048 16384 1 # /usr > g: 1024.0M 46158912 4.2BSD 2048 16384 1 # /usr/X11R6 > h: 8238.1M 48256064 4.2BSD 2048 16384 1 # /usr/local > i: 16.0M 64 MSDOS > j: 3009.9M 65127648 4.2BSD 2048 16384 1 # /usr/src > k: 6144.0M 71291872 4.2BSD 2048 16384 1 # /usr/obj > l: 18685.5M 83874784 4.2BSD 2048 16384 1 # /home > Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] > /dev/rsd1a: 1024.0MB in 2097152 sectors of 512 bytes > 6 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each > /dev/rsd1l: 18685.5MB in 38267872 sectors of 512 bytes > 93 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each > /dev/rsd1d: 3967.5MB in 8125440 sectors of 512 bytes > 20 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each > /dev/rsd1f: 6309.4MB in 12921632 sectors of 512 bytes > 32 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each > /dev/rsd1g: 1024.0MB in 2097152 sectors of 512 bytes > 6 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each > /dev/rsd1h: 8238.1MB in 16871584 sectors of 512 bytes > 41 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each > /dev/rsd1k: 6144.0MB in 12582912 sectors of 512 bytes > 31 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each > /dev/rsd1j: 3009.9MB in 6164224 sectors of 512 bytes > 15 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each > /dev/rsd1e: 6332.2MB in 12968352 sectors of 512 bytes > 32 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each > Available disks are: sd0. > Which disk do you wish to initialize? (or 'done') [done] > /dev/sd1a (0d52d29dff846554.a) on /mnt type ffs (rw, asynchronous, local) > /dev/sd1l (0d52d29dff846554.l) on /mnt/home type ffs (rw, asynchronous, > local, nodev, nosuid) > /dev/sd1d (0d52d29dff846554.d) on /mnt/tmp type ffs (rw, asynchronous, local, > nodev, nosuid) > /dev/sd1f (0d52d29dff846554.f) on /mnt/usr type ffs (rw, asynchronous, local, > nodev) > /dev/sd1g (0d52d29dff846554.g) on /mnt/usr/X11R6 type ffs (rw, asynchronous, > local, nodev) > /dev/sd1h (0d52d29dff846554.h) on /mnt/usr/local type ffs (rw, asynchronous, > local, nodev) > /dev/sd1k (0d52d29dff846554.k) on /mnt/usr/obj type ffs (rw, asynchronous, > local, nodev, nosuid) > /dev/sd1j (0d52d29dff846554.j) on /mnt/usr/src type ffs (rw, asynchronous, > local, nodev, nosuid) > /dev/sd1e (0d52d29dff846554.e) on /mnt/var type ffs (rw, asynchronous, local, > nodev, nosuid) > > Let's install the sets! > Location of sets? (disk http nfs or 'done') [http] disk > Is the disk partition already mounted? [no] > Available disks are: sd0 sd1. > Which disk contains the install media? (or 'done') [sd0] sd0 > a: 1187232 49152 4.2BSD 2048 16384 16142 > i: 16384 32768 MSDOS > Available sd0 partitions are: a i. > Which sd0 partition has the install sets? (or 'done') [a] a > Pathname to the sets? (or 'done') [7.6/arm64] > > Select sets by entering a set name, a file name pattern or 'all'. De-select > sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled '[X]'. > [X] bsd [X] base76.tgz [X] game76.tgz [X] xfont76.tgz > [X] bsd.mp [X] comp76.tgz [X] xbase76.tgz [X] xserv76.tgz > [X] bsd.rd [X] man76.tgz [X] xshare76.tgz > Set name(s)? (or 'abort' or 'done') [done] > Directory does not contain SHA256.sig. Continue without verification? [no] yes > Installing bsd 100% |**************************| 17344 KB 00:01 > Installing bsd.mp 100% |**************************| 17425 KB 00:01 > Installing bsd.rd 100% |**************************| 18008 KB 00:01 > Installing base76.tgz 100% |**************************| 306 MB 00:49 > Extracting etc.tgz 100% |**************************| 264 KB 00:00 > Installing comp76.tgz 100% |**************************| 78452 KB 00:22 > Installing man76.tgz 100% |**************************| 8049 KB 00:04 > Installing game76.tgz 100% |**************************| 2747 KB 00:00 > Installing xbase76.tgz 100% |**************************| 52028 KB 00:13 > Extracting xetc.tgz 100% |**************************| 8716 00:00 > Installing xshare76.tgz 100% |**************************| 4552 KB 00:04 > Installing xfont76.tgz 100% |**************************| 23023 KB 00:04 > Installing xserv76.tgz 100% |**************************| 15605 KB 00:03 > Installing BUILDINFO 100% |**************************| 54 00:00 > Location of sets? (disk http nfs or 'done') [done] > > What timezone are you in? ('?' for list) [Canada/Mountain] Europe/Budapest > Saving configuration files... done. > Making all device nodes... done. > Multiprocessor machine; using bsd.mp instead of bsd. > fw_update: add none; update none > Relinking to create unique kernel... done. > > CONGRATULATIONS! Your OpenBSD install has been successfully completed! > > When you login to your new system the first time, please read your mail > using the 'mail' command. > > Exit to (S)hell, (H)alt or (R)eboot? [reboot] > > > ------ reboot ------ > > U-Boot 2024.10-rc2 (Aug 15 2024 - 20:05:16 +0200) > > Model: Radxa ZERO 3W > DRAM: 8 GiB (effective 7.7 GiB) > PMIC: RK817 (on=0x40, off=0x00) > Core: 299 devices, 28 uclasses, devicetree: separate > MMC: mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0 > Loading Environment from nowhere... OK > In: serial@fe660000 > Out: serial@fe660000 > Err: serial@fe660000 > Model: Radxa ZERO 3W > Net: No ethernet found. > Hit any key to stop autoboot: 0 > Scanning for bootflows in all bootdevs > Seq Method State Uclass Part Name Filename > --- ----------- ------ -------- ---- ------------------------ > ---------------- > Scanning global bootmeth 'efi_mgr': > Card did not respond to voltage select! : -110 > 0 efi_mgr ready (none) 0 <NULL> > ** Booting bootflow '<NULL>' with efi_mgr > Booting: mmc 1 > disks: sd0* sd1 >>> OpenBSD/arm64 BOOTAA64 1.20 > boot> boot sd1a:/bsd > booting sd1a:/bsd: 11545200+2769512+301024+845320 > [939119+91+1307304+809059]=0x8 > [ using 3056352 bytes of bsd ELF symbol table ] > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org > > OpenBSD 7.6-beta (GENERIC.MP) #152: Tue Aug 13 15:00:35 MDT 2024 > [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/GENERIC.MP > real mem = 8317743104 (7932MB) > avail mem = 7976210432 (7606MB) > random: good seed from bootblocks > mainbus0 at root: Radxa ZERO 3W > psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND > efi0 at mainbus0: UEFI 2.10 > efi0: Das U-Boot rev 0x20241000 > smbios0 at efi0: SMBIOS 3.7.0 > smbios0: vendor U-Boot version "2024.10-rc2" date 10/01/2024 > smbios0: radxa Radxa ZERO 3W > cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0 > > cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > > cpu0: 512KB 64b/line 16-way L2 cache > > cpu0: > DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPS > cpu1 at mainbus0 mpidr 100: ARM Cortex-A55 r2p0 > > cpu1: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > > cpu1: 512KB 64b/line 16-way L2 cache > > cpu2 at mainbus0 mpidr 200: ARM Cortex-A55 r2p0 > > cpu2: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > > cpu2: 512KB 64b/line 16-way L2 cache > > cpu3 at mainbus0 mpidr 300: ARM Cortex-A55 r2p0 > > cpu3: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > > cpu3: 512KB 64b/line 16-way L2 cache > > scmi0 at mainbus0: SCMI 2.0 > > apm0 at mainbus0 > > agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4 ipi: 0, 1, 2: > "interrupt-c" > syscon0 at mainbus0: "syscon" > > rkiovd0 at syscon0 > > syscon1 at mainbus0: "syscon" > > syscon2 at mainbus0: "syscon" > > syscon3 at mainbus0: "syscon" > > syscon4 at mainbus0: "syscon" > > syscon5 at mainbus0: "syscon" > > syscon6 at mainbus0: "syscon" > > rkclock0 at mainbus0: PMUCRU > > rkclock1 at mainbus0: CRU > > syscon7 at mainbus0: "power-management" > > "power-controller" at syscon7 not configured > > syscon8 at mainbus0: "qos" > > syscon9 at mainbus0: "qos" > > syscon10 at mainbus0: "qos" > > syscon11 at mainbus0: "qos" > > syscon12 at mainbus0: "qos" > > syscon13 at mainbus0: "qos" > > syscon14 at mainbus0: "qos" > > syscon15 at mainbus0: "qos" > > syscon16 at mainbus0: "qos" > > syscon17 at mainbus0: "qos" > > syscon18 at mainbus0: "qos" > > syscon19 at mainbus0: "qos" > > syscon20 at mainbus0: "qos" > > syscon21 at mainbus0: "qos" > > syscon22 at mainbus0: "qos" > > syscon23 at mainbus0: "qos" > > syscon24 at mainbus0: "qos" > > syscon25 at mainbus0: "qos" > > syscon26 at mainbus0: "qos" > > syscon27 at mainbus0: "qos" > > syscon28 at mainbus0: "qos" > > syscon29 at mainbus0: "qos" > > syscon30 at mainbus0: "qos" > > syscon31 at mainbus0: "qos" > > rkcomphy0 at mainbus0 > > rkusbphy0 at mainbus0: phy 0 > > rkpinctrl0 at mainbus0: "pinctrl" > > rkgpio0 at rkpinctrl0 > > rkgpio1 at rkpinctrl0 > > rkgpio2 at rkpinctrl0 > > rkgpio3 at rkpinctrl0 > > rkgpio4 at rkpinctrl0 > > "fit-images" at mainbus0 not configured > > "l3-cache" at mainbus0 not configured > > "opp-table-0" at mainbus0 not configured > > rkdrm0 at mainbus0 > > drm0 at rkdrm0 > > "firmware" at mainbus0 not configured > > "opp-table-1" at mainbus0 not configured > > simpleaudio0 at mainbus0 > > "pmu" at mainbus0 not configured > > agtimer0 at mainbus0: 24000 kHz > > "xin24m" at mainbus0 not configured > > "xin32k" at mainbus0 not configured > > "sram" at mainbus0 not configured > > xhci0 at mainbus0, xHCI 1.10 > > usb0 at xhci0: USB revision 3.0 > > uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev > 3.00/1.001 > xhci1 at mainbus0, xHCI 1.10 > > usb1 at xhci1: USB revision 3.0 > > uhub1 at usb1 configuration 1 interface 0 "Generic xHCI root hub" rev > 3.00/1.001 > rkiic0 at mainbus0 > > iic0 at rkiic0 > > rkpmic0 at iic0 addr 0x20: RK817 > > "rockchip,rk8600" at iic0 addr 0x40 not configured > > "gpu" at mainbus0 not configured > > "video-codec" at mainbus0 not configured > > "iommu" at mainbus0 not configured > > "rga" at mainbus0 not configured > > "video-codec" at mainbus0 not configured > > "iommu" at mainbus0 not configured > > "vop" at mainbus0 not configured > > "iommu" at mainbus0 not configured > > "hdmi" at mainbus0 not configured > > "dfi" at mainbus0 not configured > > dwmmc0 at mainbus0: 50 MHz base clock > > sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma > > dwmmc1 at mainbus0: 50 MHz base clock > > sdmmc1 at dwmmc1: 4-bit, sd high-speed, dma > > dwmshc0 at mainbus0 > > dwmshc0: SDHC 4.20, 200 MHz base clock > > sdmmc2 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma > > "i2s" at mainbus0 not configured > > "dma-controller" at mainbus0 not configured > > "dma-controller" at mainbus0 not configured > > "watchdog" at mainbus0 not configured > > com0 at mainbus0: dw16550, 64 byte fifo > > com1 at mainbus0: dw16550, 64 byte fifo > > com1: console > > rktemp0 at mainbus0 > > "saradc" at mainbus0 not configured > > "hdmi-con" at mainbus0 not configured > > gpioleds0 at mainbus0: "heartbeat" > > "regulator-1v8-vcc" at mainbus0 not configured > > "regulator-1v8-vcca" at mainbus0 not configured > > "regulator-1v8-vcca-image" at mainbus0 not configured > > "regulator-3v3-vcc" at mainbus0 not configured > > "regulator-5v0-vcc-sys" at mainbus0 not configured > > "sdio-pwrseq" at mainbus0 not configured > > "binman" at mainbus0 not configured > > "dmc" at mainbus0 not configured > > rkrng0 at mainbus0: ver 2 > > "nvmem" at mainbus0 not configured > > scsibus0 at sdmmc0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SD/MMC, NCard, 0010> removable > sd0: 14910MB, 512 bytes/sector, 30535680 sectors > scsibus1 at sdmmc2: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <Samsung, CUTB42, 0000> > sd1: 59640MB, 512 bytes/sector, 122142720 sectors > sdmmc1: can't enable card > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd1a (0d52d29dff846554.a) swap on sd1b dump on sd1b > cpu0: regulator not implemented > rkdrm0: no display interface ports configured > Automatic boot in progress: starting file system checks. > /dev/sd1a (0d52d29dff846554.a): file system is clean; not checking > /dev/sd1l (0d52d29dff846554.l): file system is clean; not checking > /dev/sd1d (0d52d29dff846554.d): file system is clean; not checking > /dev/sd1f (0d52d29dff846554.f): file system is clean; not checking > /dev/sd1g (0d52d29dff846554.g): file system is clean; not checking > /dev/sd1h (0d52d29dff846554.h): file system is clean; not checking > /dev/sd1k (0d52d29dff846554.k): file system is clean; not checking > /dev/sd1j (0d52d29dff846554.j): file system is clean; not checking > /dev/sd1e (0d52d29dff846554.e): file system is clean; not checking > pf enabled > starting network > reordering: ld.so libc libcrypto sshd sshd-session ssh-agent. > openssl: generating isakmpd RSA keys... done. > openssl: generating iked ECDSA keys... done. > ssh-keygen: generating new host keys: RSA ECDSA ED25519 > sshd: (ED25519) SHA256:6RTHh+5m0YEPFemPRbWxM15flworTbY6A0d3m7YH6c4 > starting early daemons: syslogd pflogd ntpd. > starting RPC daemons:. > savecore: no core dump > checking quotas: done. > clearing /tmp > kern.securelevel: 0 -> 1 > creating runtime link editor directory cache. > preserving editor files. > starting network daemons: sshd smtpd sndiod. > running rc.firsttime > fw_update: add none; update none > starting local daemons: cron. > Tue Aug 13 23:42:17 CEST 2024 > > OpenBSD/arm64 (zero.my.domain) (console) > > login: root > Password: > OpenBSD 7.6-beta (GENERIC.MP) #152: Tue Aug 13 15:00:35 MDT 2024 > > Welcome to OpenBSD: The proactively secure Unix-like operating system. > > Please use the sendbug(1) utility to report bugs in the system. > Before reporting a bug, please try to reproduce it with the latest > version of the code. With bug reports, please try to ensure that > enough information to reproduce the problem is enclosed, and if a > known fix for it exists, include that as well. > > You have mail. > zero# > > ------------------------------------------------------------ > > --Z--
