On Fri, May 28, 2021 at 04:24:59PM +0200, Axel Braun wrote: > Am Freitag, 28. Mai 2021, 15:46:20 CEST schrieben Sie: > > .... > > > > Yes, I could spot the device and partition, but struggeling with the > > > correct boot command: > > > fatload usb <dev>[:partition] <loadAddress> <bootfilename> > > > -> what is the bootfilename it is looking for? > > > > It's a command that loads a file into memory, nothing else. > > > > You can then specify the addres to one of the boot* family of commands > > to execute it. You can also use multiple files (kernel, ramdisk, > > devicetree) and then you need to pass their addresses to the boot* > > command correctly. > > > > The command lists predefined in the environment use some load addresses > > that were picked by the maintainer in the board configuration to not > > conflict with the board hardware. > > OK....the manual was not really...easy to spot what to do. > Finally it worked with > > usb reset > run bootcmd_usb0
You probably should not need 'usb reset'. If you do that's something that should be fixed (if the u-boot you are using comes from openSUSE). Please report a bug. Thanks Michal
