On Wed, Dec 23, 2020 at 4:06 AM Giant Sand Fans <[email protected]> wrote: > > Hi, > Maybe it's the same with rpi400 . There's a previous msgs for rpbi400 with > attached ubin binary. So change it in your sd card boot partition. > > It worked for me. >
Yes, I found it: https://lists.opensuse.org/archives/list/[email protected]/message/J2YM5M5TMWZC5DUYHU2YQ2KLS2BUH6LW/ It worked for me too. Now I got to the login screen on Tumbleweed. No need to use another SD card. Thanks! On Wed, Dec 23, 2020 at 7:14 AM Matthias Brugger <[email protected]> wrote: > > Can you try with a different SD card or check the partition table of your SD > card. U-Boot wasn't able to find your partition table and therefore started > PXE > boot. As it seems you don't have a network cable plugged in, it gets a timeout > every time you try to access one of the countless PXE file options. > > Regards, > Matthias > Thank you for the explanation, but as I said, the suggested workaround worked for me with the same SD card I used previously. Just in case it helps somehow, here is the output of fdisk -l for my SD card: Disk /dev/mmcblk0: 29.7 GiB, 31914983424 bytes, 62333952 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x5826a096 Device Boot Start End Sectors Size Id Type /dev/mmcblk0p1 2048 133119 131072 64M c W95 FAT32 (LBA) /dev/mmcblk0p2 133120 1157119 1024000 500M 82 Linux swap / Solaris /dev/mmcblk0p3 1157120 11028446 9871327 4.7G 83 Linux I flashed with balenaEtcher the Tumbleweed image I downloaded from the openSUSE wiki. Antonio The Linux Kamarada Project http://kamarada.github.io/ _______________________________________________ openSUSE ARM mailing list -- [email protected] To unsubscribe, email [email protected] List Netiquette: https://en.opensuse.org/openSUSE:Mailing_list_netiquette List Archives: https://lists.opensuse.org/archives/list/[email protected]
