On Tue, 3 Sept 2024 at 15:42, Adrian Torregrosa <[email protected]> wrote: > > Hello. > > I'm afraid the new release did not work for any of my two Allwinner devices. > The dd commands went through of course but upon rebooting the devices failed > to reach the login; please see the console outputs attached.
Those outputs look like I would expect for a working device, I would expect the grub menu to come up shortly after that. What are you seeing? Peter > BR > > -----Original Message----- > From: Peter Robinson <[email protected]> > To: Adrian Torregrosa <[email protected]> > Cc: [email protected] > Subject: Re: [fedora-arm] U-Boot 2024.10 testing > Date: 2024.09.02 23:31:09 > > Hi Adrian, > > I created Bug 2309138 - Allwinner A64 devices fail to boot once their uboot > gets upgraded to 2024.04. > > > So I think uboot-tools-2024.10-0.3.rc3.fc41 should fix the Allwinner > issues, if you could test it and provide karma on the update below > that would be fab. I tested it on my Pine64+ > > https://bodhi.fedoraproject.org/updates/FEDORA-2024-dbf55dbc52 > > I upgraded mi Radxa Rock Pi E with the UBoot in the rc2 .rpm and as far as I > can tell it works fine: > > U-Boot TPL 2024.10-rc2 (Aug 15 2024 - 00:00:00) > DDR3, 333MHz > BW=32 Col=10 Bk=8 CS0 Row=14 CS=1 Die BW=16 Size=512MB > Trying to boot from BOOTROM > Returning to boot ROM... > > U-Boot SPL 2024.10-rc2 (Aug 15 2024 - 00:00:00 +0000) > Trying to boot from MMC2 > ## Checking hash(es) for config config-1 ... OK > ## Checking hash(es) for Image atf-1 ... sha256+ OK > ## Checking hash(es) for Image u-boot ... sha256+ OK > ## Checking hash(es) for Image fdt-1 ... sha256+ OK > ## Checking hash(es) for Image atf-2 ... sha256+ OK > ## Checking hash(es) for Image atf-3 ... sha256+ OK > NOTICE: BL31: v2.10.4(release): > NOTICE: BL31: Built : 00:00:00, Jul 17 2024 > NOTICE: BL31:Rockchip release version: v1.2 > > > U-Boot 2024.10-rc2 (Aug 15 2024 - 00:00:00 +0000) > > Model: Radxa ROCK Pi E > DRAM: 512 MiB (effective 510 MiB) > PMIC: RK805 (on=0x40, off=0x01) > Core: 244 devices, 29 uclasses, devicetree: separate > MMC: mmc@ff500000: 1, mmc@ff520000: 0 > Loading Environment from MMC... Reading from MMC(1)... *** Warning - bad CRC, > using default environment > > In: serial@ff130000 > Out: serial@ff130000 > Err: serial@ff130000 > Model: Radxa ROCK Pi E > Net: eth0: ethernet@ff540000 > Found DTB: rockchip/rk3328-rock-pi-e.dtb > Card did not respond to voltage select! : -110 > > *** U-Boot Boot Menu *** > > Fedora > mmc 1 > Exit > > > Press UP/DOWN to move, ENTER to select, ESC to quit > Booting: Fedora > Found DTB: rockchip/rk3328-rock-pi-e.dtb > ethernet@ff540000 Waiting for PHY auto negotiation to complete....... done > Speed: 1000, full duplex > . > . > . > > > > > Best regards. > > -----Original Message----- > From: Peter Robinson <[email protected]> > To: Adrian Torregrosa <[email protected]> > Cc: [email protected] > Subject: Re: [fedora-arm] U-Boot 2024.10 testing > Date: 2024.09.01 19:43:27 > > Hi Adrian, > > A couple of weeks ago I upgraded my Orange Pi Zero Plus and my Sinovoip > Banana Pi M64, both of which are based on Allwinner 64, from F39 to F40. That > went fine so after that I attempted upgrading their UBoots and that did not > work: > > > I think I've got to the bottom of the issue, any chance you can do a > F-41 bug report for me? Link below should go straight there for you. > > https://bugzilla.redhat.com/enter_bug.cgi?product=Fedora&version=41&component=uboot-tools > > So I reverted back to U-Boot SPL 2023.07. > > This afternoon I tried upgrading the Banana Pi to this rc2 version and the > result was quite similar: > > > Yup, it's the same. > > For the record, I was able to upgrade my Raspberry Pi 3B's and my Radxa Rock > Pi E's UBoots to 2024.04. > > > What about to the 2024.10 RC builds in F-41? You can use the F-41 > U-Boot without having to upgrade the OS. Mostly interested in the > RockPi as I can test the RPi3. > > Thanks, > Peter > > Best regards. > > -----Original Message----- > From: Peter Robinson <[email protected]> > To: [email protected] > Subject: [fedora-arm] U-Boot 2024.10 testing > Date: 2024.08.16 12:45:29 > > Hi Folks, > > I've started building the 2024.10 RCs in F-41+ so it would be great to > get some testing. > > I found that at least the Allwinner a64 devices looked like they > regressed in F-40 and I've tested the Pine64+ with the rc2 build and I > think they should be OK now. > > It would be great if people could test and provide some feedback on > these builds as we go towards F-41 beta freeze. > > https://koji.fedoraproject.org/koji/buildinfo?buildID=2530785 > > Peter > > > -- _______________________________________________ arm mailing list -- [email protected] To unsubscribe send an email to [email protected] Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/[email protected] Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
