Thanks Todd. My messages kept getting deleted so I thought to try again
I probably over-redacted the output of the playbook to only show the
relevant bits. The full playbook is below:
== playbook ==
- name: Get Server Recycling Order
hosts: "{{ my_servers | default ('localhost') }}"
become: yes
become_method: sudo
become_user: root
tasks:
- name: Set Patching Sequence
tags: always
block:
- name: Get IP addresses of eth0 using nmcli command
command: nmcli -g ip4.address conn show "System eth0"
register: nmcli_output
changed_when: false
- name: Get nmcli output
debug:
var: nmcli_output
- name: Set is_leader variable based on number of IPs
set_fact:
is_leader: "{{ (nmcli_output.stdout.split('|') | length) > 1
}}"
- name: Display if server is ACTIVE (1) or PASSIVE (0)
debug:
var: is_leader
- name: Debug is_leader value
debug:
msg: "is_leader value for {{ inventory_hostname }} is {{
is_leader }}"
- name: Re-confirm is_leader before adding to group
debug:
msg: "Preparing to add {{ inventory_hostname }} to stby group
based on is_leader = {{ is_leader }}"
when: is_leader is false
- name: Add standby proxysql node
add_host:
name: "{{ inventory_hostname }}"
groups: nodes_stby
when: is_leader == False
- name: Re-confirm is_leader before adding to group
debug:
msg: "Preparing to add {{ inventory_hostname }} to prim group
based on is_leader = {{ is_leader }}"
when: is_leader == True
- name: Add primary proxysql node
add_host:
name: "{{ inventory_hostname }}"
groups: nodes_prim
when: is_leader == True
== output ==
PLAY [Get Server Recycling Order]
**********************************************************************************************************************************************
TASK [Gathering Facts]
*********************************************************************************************************************************************************
Tuesday 23 April 2024 19:46:14 +0000 (0:00:00.084) 0:00:00.109
*********
ok: [node-2]
ok: [node-1]
TASK [Get IP addresses of eth0 using nmcli command]
****************************************************************************************************************************
Tuesday 23 April 2024 19:46:29 +0000 (0:00:15.167) 0:00:15.277
*********
ok: [node-2] => {
"changed": false,
"cmd": [
"nmcli",
"-g",
"ip4.address",
"conn",
"show",
"System eth0"
],
"delta": "0:00:00.026130",
"end": "2024-04-23 15:46:30.828281",
"rc": 0,
"start": "2024-04-23 15:46:30.802151"
}
STDOUT:
192.168.10.11/24
ok: [node-1] => {
"changed": false,
"cmd": [
"nmcli",
"-g",
"ip4.address",
"conn",
"show",
"System eth0"
],
"delta": "0:00:00.038040",
"end": "2024-04-23 15:46:30.893109",
"rc": 0,
"start": "2024-04-23 15:46:30.855069"
}
STDOUT:
192.168.10.10/24 | 192.168.4.1/32
TASK [Get nmcli output]
********************************************************************************************************************************************************
Tuesday 23 April 2024 19:46:31 +0000 (0:00:01.458) 0:00:16.736
*********
ok: [node-1] => {
"nmcli_output": {
"changed": false,
"cmd": [
"nmcli",
"-g",
"ip4.address",
"conn",
"show",
"System eth0"
],
"delta": "0:00:00.038040",
"end": "2024-04-23 15:46:30.893109",
"failed": false,
"msg": "",
"rc": 0,
"start": "2024-04-23 15:46:30.855069",
"stderr": "",
"stderr_lines": [],
"stdout": "192.168.10.10/24 | 192.168.4.1/32",
"stdout_lines": [
"192.168.10.10/24 | 192.168.4.1/32"
]
}
}
ok: [node-2] => {
"nmcli_output": {
"changed": false,
"cmd": [
"nmcli",
"-g",
"ip4.address",
"conn",
"show",
"System eth0"
],
"delta": "0:00:00.026130",
"end": "2024-04-23 15:46:30.828281",
"failed": false,
"msg": "",
"rc": 0,
"start": "2024-04-23 15:46:30.802151",
"stderr": "",
"stderr_lines": [],
"stdout": "192.168.10.11/24",
"stdout_lines": [
"192.168.10.11/24"
]
}
}
TASK [Set is_leader variable based on number of IPs]
**************************************************************************************************************************
Tuesday 23 April 2024 19:46:31 +0000 (0:00:00.079) 0:00:16.815
*********
ok: [node-1] => {
"ansible_facts": {
"is_leader": true
},
"changed": false
}
ok: [node-2] => {
"ansible_facts": {
"is_leader": false
},
"changed": false
}
TASK [Display if server is ACTIVE (1) or PASSIVE (0)]
**************************************************************************************************************************
Tuesday 23 April 2024 19:46:31 +0000 (0:00:00.083) 0:00:16.898
*********
ok: [node-1] => {
"is_leader": true
}
ok: [node-2] => {
"is_leader": false
}
TASK [Debug is_leader value]
**************************************************************************************************************************************************
Tuesday 23 April 2024 19:46:31 +0000 (0:00:00.072) 0:00:16.971
*********
ok: [node-1] => {}
MSG:
is_leader value for node-1 is True
ok: [node-2] => {}
MSG:
is_leader value for node-2 is False
TASK [Re-confirm is_leader before adding to group]
****************************************************************************************************************************
Tuesday 23 April 2024 19:46:31 +0000 (0:00:00.074) 0:00:17.045
*********
skipping: [node-1] => {}
ok: [node-2] => {}
MSG:
Preparing to add node-2 to stby group based on is_leader = False
TASK [Add standby proxysql node]
***********************************************************************************************************************************************
Tuesday 23 April 2024 19:46:31 +0000 (0:00:00.088) 0:00:17.134
*********
skipping: [node-1] => {
"changed": false,
"skip_reason": "Conditional result was False"
}
TASK [Re-confirm is_leader before adding to group]
****************************************************************************************************************************
Tuesday 23 April 2024 19:46:31 +0000 (0:00:00.036) 0:00:17.170
*********
ok: [node-1] => {}
MSG:
Preparing to add node-1 to prim group based on is_leader = True
skipping: [node-2] => {}
TASK [Add primary proxysql node]
***********************************************************************************************************************************************
Tuesday 23 April 2024 19:46:31 +0000 (0:00:00.059) 0:00:17.230
*********
changed: [node-1] => {
"add_host": {
"groups": [
"nodes_prim"
],
"host_name": "node-1",
"host_vars": {}
},
"changed": true
}
PLAY RECAP
*********************************************************************************************************************************************************************
localhost : ok=1 changed=0 unreachable=0 failed=0
skipped=0 rescued=0 ignored=0
node-1 : ok=8 changed=1 unreachable=0 failed=0 skipped=2
rescued=0 ignored=0
node-2 : ok=7 changed=0 unreachable=0 failed=0 skipped=1
rescued=0 ignored=0
A lot of those debug steps were added in by me to figure out why the
"is_leader" condition was being skipped when it was false. Also the plan
was also to add all the hosts to a single group but in an order that serial
tasks could be executed in a subsequent playbook. Hopefully this response
gets through
Thanks
On Thursday, April 25, 2024 at 1:38:38 PM UTC+1 deewon wrote:
> Testing if my email is still deleted without any code
>
> On Tuesday, April 23, 2024 at 11:28:59 PM UTC+1 Todd Lewis wrote:
>
>> All that said, I don't see why this one task wouldn't work for your
>> purposes:
>>
>> - name: Add hosts to groups
>> ansible.builtin.add_host:
>> name: "{{ inventory_hostname }}"
>> groups:
>> - nodes
>> - "{{ 'nodes_prim' if is_active | d(false) else 'nodes_stby' }}"
>>
>>
>> On 4/23/24 5:40 PM, Todd Lewis wrote:
>>
>> Hard to say. The job log you show doesn't match the tasks in the playbook
>> you posted. They seem to be the same down to the "Debug is_leader value"
>> task, but after that the task names in the log don't match those in the
>> playbook.
>>
>> In the playbook you posted, task "Add standby host" an task "Add primary
>> host" both add the hosts to the same group. That may be a source of your
>> problem. But as we don't see the output for those tasks …, hmm.
>> —
>> Todd
>>
>> On 4/23/24 4:03 PM, 'deewon' via Ansible Project wrote:
>>
>> ansible version: 2:11.2
>> jinja version: 3.0.3
>> python version: 3.6.8
>>
>> Hello all
>>
>> I have a peculiar problem with a relatively simple playbook I have
>> written. It basically checks 2 servers to determine which one has more than
>> 1 IP and uses that to set a simp;e fact called "is_leader" for each node.
>>
>> This fact is then to be used to build an in-memory inventory using
>> module add_host to iterate through the servers based on the value of that
>> fact. See below:
>>
>> - name: Get Server Recycling Order
>> hosts: "{{ my_servers | default ('localhost') }}"
>> become: yes
>> become_method: sudo
>> become_user: root
>>
>> tasks:
>>
>> - name: Set Patching Sequence
>> tags: always
>> block:
>>
>> - name: Get IP addresses of eth0 using nmcli command
>> command: nmcli -g ip4.address conn show "System eth0"
>> register: nmcli_output
>> changed_when: false
>>
>>
>> - name: Get nmcli output
>> debug:
>> var: nmcli_output
>>
>>
>> - name: Set is_leader variable based on number of IPs
>> set_fact:
>> is_leader: "{{ (nmcli_output.stdout.split('|') | length) > 1
>> }}"
>>
>>
>> - name: Display if server is ACTIVE (1) or PASSIVE (0)
>> debug:
>> var: is_leader
>>
>>
>> - name: Debug is_leader value
>> debug:
>> msg: "is_leader value for {{ inventory_hostname }} is {{
>> is_leader }}"
>>
>>
>> - name: Add standby host
>> add_host:
>> name: "{{ inventory_hostname }}"
>> groups: nodes
>> when: not is_leader
>>
>> - name: Add primary host
>> add_host:
>> name: "{{ inventory_hostname }}"
>> groups: nodes
>> when: is_leader
>>
>> #- name: Execute tasks on servers in a specified order
>> # hosts: nodes
>> # gather_facts: no
>> # serial: 1
>> # tasks:
>> # - name: Run a command in a specified order
>> # command: echo "Running on {{ inventory_hostname }}"
>> # tags: always
>>
>> The problem is that when this runs, the "is_leader" fact is ignored for
>> when the condition is false and the standby node is not added to the
>> inventory. The relevant extract from the execution is below:
>>
>> TASK [Set is_leader variable based on number of IPs]
>> **************************************************************************************************************************
>> Tuesday 23 April 2024 19:46:31 +0000 (0:00:00.079) 0:00:16.815
>> *********
>> ok: [node-1] => {
>> "ansible_facts": {
>> "is_leader": true
>> },
>> "changed": false
>> }
>> ok: [node-2] => {
>> "ansible_facts": {
>> "is_leader": false
>> },
>> "changed": false
>> }
>>
>> TASK [Display if server is ACTIVE (1) or PASSIVE (0)]
>> **************************************************************************************************************************
>> Tuesday 23 April 2024 19:46:31 +0000 (0:00:00.083) 0:00:16.898
>> *********
>> ok: [node-1] => {
>> "is_leader": true
>> }
>> ok: [node-2] => {
>> "is_leader": false
>> }
>>
>> TASK [Debug is_leader value]
>> **************************************************************************************************************************************************
>> Tuesday 23 April 2024 19:46:31 +0000 (0:00:00.072) 0:00:16.971
>> *********
>> ok: [node-1] => {}
>>
>> MSG:
>>
>> is_leader value for node-1 is True
>> ok: [node-2] => {}
>>
>> MSG:
>>
>> is_leader value for node-2 is False
>>
>> TASK [Re-confirm is_leader before adding to group]
>> ****************************************************************************************************************************
>> Tuesday 23 April 2024 19:46:31 +0000 (0:00:00.074) 0:00:17.045
>> *********
>> skipping: [node-1] => {}
>> ok: [node-2] => {}
>>
>> MSG:
>>
>> Preparing to add node-2 to stby group based on is_leader = False
>>
>> TASK [Add standby proxysql node]
>> ***********************************************************************************************************************************************
>> Tuesday 23 April 2024 19:46:31 +0000 (0:00:00.088) 0:00:17.134
>> *********
>> skipping: [node-1] => {
>> "changed": false,
>> "skip_reason": "Conditional result was False"
>> }
>>
>> TASK [Re-confirm is_leader before adding to group]
>> ****************************************************************************************************************************
>> Tuesday 23 April 2024 19:46:31 +0000 (0:00:00.036) 0:00:17.170
>> *********
>> ok: [node-1] => {}
>>
>> MSG:
>>
>> Preparing to add node-1 to prim group based on is_leader = True
>> skipping: [node-2] => {}
>>
>> TASK [Add primary proxysql node]
>> ***********************************************************************************************************************************************
>> Tuesday 23 April 2024 19:46:31 +0000 (0:00:00.059) 0:00:17.230
>> *********
>> changed: [node-1] => {
>> "add_host": {
>> "groups": [
>> "nodes_prim"
>> ],
>> "host_name": "node-1",
>> "host_vars": {}
>> },
>> "changed": true
>> }
>>
>> PLAY RECAP
>> *********************************************************************************************************************************************************************
>> localhost : ok=1 changed=0 unreachable=0
>> failed=0 skipped=0 rescued=0 ignored=0
>> node-1 : ok=8 changed=1 unreachable=0 failed=0 skipped=2
>> rescued=0 ignored=0
>> node-2 : ok=7 changed=0 unreachable=0 failed=0 skipped=1
>> rescued=0 ignored=0
>>
>>
>> I'm not sure what I'm missing regarding this behaviour as it seems like
>> it should simply work?
>>
>> Thanks
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Ansible Project" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/ansible-project/4d6c8e6a-478c-4736-9e10-c12032dd7c3fn%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/ansible-project/4d6c8e6a-478c-4736-9e10-c12032dd7c3fn%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>>
>> --
>> Todd
>>
>>
>> --
>> Todd
>>
>>
--
You received this message because you are subscribed to the Google Groups
"Ansible Project" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/ansible-project/0ee31b0c-1de0-4394-9799-7c5ba7177eadn%40googlegroups.com.
