I'd try two things if I were on your shoes: - Increase memory on the ansible controller - Update python to a more up-to-date version
Regards, El vie, 9 dic 2022 a las 21:44, Mike Eggleston (<[email protected]>) escribió: > I’ve set “forks = 1” and rerun my test which does an ansible-playbook and > an uptime. > Could it be the register rather than a memory leak? > Here free(1) keeps going down: > > [meggleston@pc1uepsiadm01 ~]$ while true > > do > > date > > free -m > > sleep 60 > > done > Fri Dec 9 16:30:31 EST 2022 > total used free shared buff/cache > available > Mem: 7821 1139 6190 18 490 > 6408 > Swap: 4095 2897 1198 > Fri Dec 9 16:31:31 EST 2022 > total used free shared buff/cache > available > Mem: 7821 1149 6127 19 544 > 6398 > Swap: 4095 2896 1199 > Fri Dec 9 16:32:31 EST 2022 > total used free shared buff/cache > available > Mem: 7821 1163 6112 19 544 > 6383 > Swap: 4095 2896 1199 > Fri Dec 9 16:33:31 EST 2022 > total used free shared buff/cache > available > Mem: 7821 1173 6100 19 546 > 6373 > Swap: 4095 2896 1199 > Fri Dec 9 16:34:31 EST 2022 > total used free shared buff/cache > available > Mem: 7821 1184 6081 19 554 > 6362 > Swap: 4095 2895 1200 > Fri Dec 9 16:35:31 EST 2022 > total used free shared buff/cache > available > Mem: 7821 1215 6042 20 562 > 6329 > Swap: 4095 2885 1210 > Fri Dec 9 16:36:31 EST 2022 > total used free shared buff/cache > available > Mem: 7821 1225 6032 20 563 > 6319 > Swap: 4095 2884 1211 > Fri Dec 9 16:37:31 EST 2022 > total used free shared buff/cache > available > Mem: 7821 1229 6028 20 563 > 6315 > Swap: 4095 2880 1215 > Fri Dec 9 16:38:31 EST 2022 > total used free shared buff/cache > available > Mem: 7821 1257 5999 20 563 > 6287 > Swap: 4095 2861 1234 > Fri Dec 9 16:39:31 EST 2022 > total used free shared buff/cache > available > Mem: 7821 1286 5971 21 563 > 6259 > Swap: 4095 2860 1235 > Fri Dec 9 16:40:31 EST 2022 > total used free shared buff/cache > available > Mem: 7821 1295 5961 21 563 > 6249 > Swap: 4095 2860 1235 > > > The playbook is really stupid: > > [meggleston@pc1uepsiadm01 playbooks]$ cat y.yml > # $Id$ > # $Log$ > > # set cyberark to a known point > > # :!ansible-playbook --syntax-check % > # :!ansible-playbook --check --limit pc1uepsiadm01.res.prod.global % > # :!ansible-playbook --limit pc1uepsiadm01.res.prod.global % > # :!ansible-playbook % > > --- > - hosts: all > become: no > gather_facts: true > > vars: > reportfile: > "/tmp/inventory-report-{{ansible_date_time.year}}{{ansible_date_time.month}}{{ansible_date_time.day}}.csv" > uptime_host: "UNKNOWN" > > tasks: > - name: "get the uptime" > command: uptime > register: uptime > > - set_fact: > uptime_host="{{uptime.stdout}}" > when: uptime is match("") > > - name: "create the file and write the header" > lineinfile: > path="{{reportfile}}" > state="present" > insertafter="EOF" > create="true" > line="\"hostname\",\"uptime\"" > delegate_to: localhost > > - name: "write the line for this host" > lineinfile: > path="{{reportfile}}" > state="present" > insertafter="EOF" > create="true" > line="\"{{ansible_host}}\",\"{{uptime_host}}\"" > delegate_to: localhost > > > Mike > > > On Dec 9, 2022, at 15:29, Mike Eggleston <[email protected]> wrote: > > Does Ansible have a memory leak (that only shows up with a high number of > hosts)? > > Mike > > [meggleston@pc1uepsiadm01 ~]$ rpm -qa | grep -i ansible > ansible-2.9.27-1.el7.noarch > > On Dec 9, 2022, at 09:16, Mike Eggleston <[email protected]> wrote: > > I changed forks = back to 5 (commented out my change) and still I get the > out of memory error. I removed all hosts that are in AWS so I’m not using > the proxy in ssh(1). My inventory is down to 4400 hosts. I wonder what’s > eating the memory…? Any ideas….? > > Current stack trace: > 82"]}, "sectors": "7812935680", "start": "2048", "holders": [], "size": > "3.64 TB"}}, "sas_device_handle": null, "sas_address": null, "virtual": 1, > "host": "RAID bus controller: Broadcom / LSI MegaRAID SAS-3 3108 [Invader] > (rev 02)", "sectorsize": "512", "removable": "0", "support_discard": "0", > "model": "PERC H730P Mini", "wwn": "0x61866da06192eb0024e6a07712d7ee30", > "holders": [], "size": "3.64 TB"}, "dm-4": {"scheduler_mode": "", > "rotational": "1", "vendor": null, "sectors": "104857600", "links": > {"masters": [], "labels": [], "ids": ["dm-name-rootvg-optvol", > "dm-uuid-LVM-h8Zoe5OZiBjf9awu8HyY4OuQIIZK52yneJbOfXRJ6QddDY581MzfUj6Ai4MOtle8"], > "uuids": ["51166620-cd67-4954-8b5f-cf91926b036d"]}, "sas_device_handle": > null, "sas_address": null, "virtual": 1, "host": "", "sectorsize": "512", > "removable": "0", "support_discard": "0", "model": null, "partitions": {}, > "holders": [], "size": "50.00 GB"}, "dm-5": {"scheduler_mode": "", > "rotational": "1", "vendor": null, "sectors": "62914560", "links": > {"masters": [], "labels": [], "ids": ["dm-name-rootvg-tmpvol", > "dm-uuid-LVM-h8Zoe5OZiBjf9awu8HyY4OuQIIZK52ynDjjkCPQW51kaWpzKqwJkcPy2qbRW0Fxm"], > "uuids": ["38f0cd51-d7e1-4bca-a062-1b39ede2fed2"]}, "sas_device_handle": > null, "sas_address": null, "virtual": 1, "host": "", "sectorsize": "512", > "removable": "0", "support_discard": "0", "model": null, "partitions": {}, > "holders": [], "size": "30.00 GB"}, "dm-2": {"scheduler_mode": "", > "rotational": "1", "vendor": null, "sectors": "125829120", "links": > {"masters": [], "labels": [], "ids": ["dm-name-rootvg-varvol", > "dm-uuid-LVM-h8Zoe5OZiBjf9awu8HyY4OuQIIZK52ynRn8k3kCCl3ICeXjPbpYKBa1d9B7s2bhs"], > "uuids": ["5cb9ffc3-fd77-4906-98d7-edb27aa63f40"]}, "sas_device_handle": > null, "sas_address": null, "virtual": 1, "host": "", "sectorsize": "512", > "removable": "0", "support_discard": "0", "model": null, "partitions": {}, > "holders": [], "size": "60.00 GB"}, "dm-3": {"scheduler_mode": "", > "rotational": "1", "vendor": null, "sectors": "8388608", "links": > {"masters": [], "labels": [], "ids": ["dm-name-rootvg-homevol", > "dm-uuid-LVM-h8Zoe5OZiBjf9awu8HyY4OuQIIZK52ynVWpzyMe28x7F4igthHHVgvTM2K8ZI08R"], > "uuids": ["8627acb7-4c2b-4394-95d0-6a084066a23a"]}, "sas_device_handle": > null, "sas_address": null, "virtual": 1, "host": "", "sectorsize": "512", > "removable": "0", "support_discard": "0", "model": null, "partitions": {}, > "holders": [], "size": "4.00 GB"}, "dm-0": {"scheduler_mode": "", > "rotational": "1", "vendor": null, "sectors": "8388608", "links": > {"masters": [], "labels": [], "ids": ["dm-name-rootvg-lv_swap", > "dm-uuid-LVM-h8Zoe5OZiBjf9awu8HyY4OuQIIZK52ynqqkyDshARxIJhfyP1hRtk5SrMN3BK79c"], > "uuids": ["799e361d-7fee-4f6b-ae45-75d75f518985"]}, "sas_device_handle": > null, "sas_address": null, "virtual": 1, "host": "", "sectorsize": "512", > "removable": "0", "support_discard": "0", "model": null, "partitions": {}, > "holders": [], "size": "4.00 GB"}, "dm-1": {"scheduler_mode": "", > "rotational": "1", "vendor": null, "sectors": "41943040", "links": > {"masters": [], "labels": [], "ids": ["dm-name-rootvg-rootvol", > "dm-uuid-LVM-h8Zoe5OZiBjf9awu8HyY4OuQIIZK52ynPxpNeSPUUNGqorDA6GDRwK4jFcd9IzuW"], > "uuids": ["798d9b72-8fc1-475f-92f0-0fad71bd3e5a"]}, "sas_device_handle": > null, "sas_address": null, "virtual": 1, "host": "", "sectorsize": "512", > "removable": "0", "support_discard": "0", "model": null, "partitions": {}, > "holders": [], "size": "20.00 GB"}}, "ansible_user_uid": 2101067335, > "ansible_ssh_host_key_dsa_public": > "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", > "ansible_bios_date": "11/26/2019", "ansible_system_capabilities": > [""]}}\r\n', 'Connection to pc1udtlhhad561.prodc1.harmony.global > closed.\r\n') > <pc1udtlhhad561.prodc1.harmony.global> ESTABLISH SSH CONNECTION FOR USER: > None > <pc1udtlhhad561.prodc1.harmony.global> SSH: EXEC ssh -C -o > ControlMaster=no -o ControlPersist=30s -o ConnectTimeout=15s -o > KbdInteractiveAuthentication=no -o > PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey > -o PasswordAuthentication=no -o ConnectTimeout=10 -o > ControlPath=/home/meggleston/.ansible/cp/e963c4e7ae > pc1udtlhhad561.prodc1.harmony.global '/bin/sh -c '"'"'rm -f -r > /home/meggleston/.ansible/tmp/ansible-tmp-1670598305.51-22544-115269321697104/ > > /dev/null 2>&1 && sleep 0'"'"'' > <pc1udtlhhad561.prodc1.harmony.global> (0, '', '') > ERROR! Unexpected Exception, this is probably a bug: [Errno 12] Cannot > allocate memory > the full traceback was: > > Traceback (most recent call last): > File "/usr/bin/ansible-playbook", line 123, in <module> > exit_code = cli.run() > File "/usr/lib/python2.7/site-packages/ansible/cli/playbook.py", line > 128, in run > results = pbex.run() > File > "/usr/lib/python2.7/site-packages/ansible/executor/playbook_executor.py", > line 169, in run > result = self._tqm.run(play=play) > File > "/usr/lib/python2.7/site-packages/ansible/executor/task_queue_manager.py", > line 282, in run > play_return = strategy.run(iterator, play_context) > File > "/usr/lib/python2.7/site-packages/ansible/plugins/strategy/linear.py", line > 311, in run > self._queue_task(host, task, task_vars, play_context) > File > "/usr/lib/python2.7/site-packages/ansible/plugins/strategy/__init__.py", > line 390, in _queue_task > worker_prc.start() > File > "/usr/lib/python2.7/site-packages/ansible/executor/process/worker.py", line > 100, in start > return super(WorkerProcess, self).start() > File "/usr/lib64/python2.7/multiprocessing/process.py", line 130, in > start > self._popen = Popen(self) > File "/usr/lib64/python2.7/multiprocessing/forking.py", line 121, in > __init__ > self.pid = os.fork() > OSError: [Errno 12] Cannot allocate memory > > > On Dec 6, 2022, at 11:55, Todd Lewis <[email protected]> wrote: > > I'm not particularly fluent in instrumenting resource consumption, but I'm > going out on a limb and guessing that 50 or so ssh connections is a lot > more light-weight than 50 forks of ansible-playbook. So ignoring ssh as a > possible resource limit for the moment, try changing forks back to 5 and > running your playbook. At the same time, in another window, monitor (in a > way to be determined by you) resource consumption. I'd expect it to work 5 > forks, just not as fast as with more forks. > > If it *does* work, then try it again with, say, 10 forks and compare > resources during that run to the 5 fork run. I expect this to also work, > barely, and that you'll be almost out of … something. But you'll also have > a much better picture of where the walls are in this black box. > > On Tuesday, December 6, 2022 at 9:32:30 AM UTC-5 [email protected] wrote: > >> I’ve not changed “strategy”, but I did change “forks” from 5 to 50. >> I have copied /etc/ansible.cfg to ~/.ansible.cfg and changed forks = 50, >> inventory = $HOME/src/ansible/inventory and log_path = >> /tmp/${USER}_ansible.log. >> >> On Dec 5, 2022, at 17:21, Todd Lewis <[email protected]> wrote: >> >> Have you changed any defaults for "strategy" or "forks"? >> >> Also I see your ssh is config'd for "-o ControlMaster=auto -o >> ControlPersist=60s". I'm not sure how many hosts you're caching connections >> for during any give 60 second window, or how much memory that would eat, >> but it may be a significant factor. >> >> On Monday, December 5, 2022 at 6:03:42 PM UTC-5 [email protected] wrote: >> >>> 5709 >>> >>> On Dec 5, 2022, at 15:56, Todd Lewis <[email protected]> wrote: >>> >>> How many hosts are in your inventory? >>> >>> On Monday, December 5, 2022 at 4:52:39 PM UTC-5 [email protected] >>> wrote: >>> >>>> I’m getting: >>>> >>>> e/meggleston/.ansible/tmp/ansible-tmp-1670263852.31-8085-175291763336523/ >>>> > /dev/null 2>&1 && sleep 0'"'"'' >>>> <pa2udtlhsql602.prod.harmony.aws2> ESTABLISH SSH CONNECTION FOR USER: >>>> None >>>> <pa2udtlhsql602.prod.harmony.aws2> SSH: EXEC ssh -C -o >>>> ControlMaster=auto -o ControlPersist=60s -o KbdInteractiveAuthentication=no >>>> -o >>>> PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey >>>> -o PasswordAuthentication=no -o ConnectTimeout=10 -o >>>> ControlPath=/home/meggleston/.ansible/cp/f012ac57b9 >>>> pa2udtlhsql602.prod.harmony.aws2 '/bin/sh -c '"'"'rm -f -r >>>> /home/meggleston/.ansible/tmp/ansible-tmp-1670263852.91-8148-50804275661258/ >>>> > /dev/null 2>&1 && sleep 0'"'"'' >>>> <pa2udtlhsql1023.prod.harmony.aws2> ESTABLISH SSH CONNECTION FOR USER: >>>> None >>>> <pa2udtlhsql604.prod.harmony.aws2> ESTABLISH SSH CONNECTION FOR USER: >>>> None >>>> <pa2udtlhsql1023.prod.harmony.aws2> SSH: EXEC ssh -C -o >>>> ControlMaster=auto -o ControlPersist=60s -o KbdInteractiveAuthentication=no >>>> -o >>>> PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey >>>> -o PasswordAuthentication=no -o ConnectTimeout=10 -o >>>> ControlPath=/home/meggleston/.ansible/cp/754f3010c5 >>>> pa2udtlhsql1023.prod.harmony.aws2 '/bin/sh -c '"'"'rm -f -r >>>> /home/meggleston/.ansible/tmp/ansible-tmp-1670263852.31-8085-175291763336523/ >>>> > /dev/null 2>&1 && sleep 0'"'"'' >>>> <pa2udtlhsql604.prod.harmony.aws2> SSH: EXEC ssh -C -o >>>> ControlMaster=auto -o ControlPersist=60s -o KbdInteractiveAuthentication=no >>>> -o >>>> PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey >>>> -o PasswordAuthentication=no -o ConnectTimeout=10 -o >>>> ControlPath=/home/meggleston/.ansible/cp/09c53a2792 >>>> pa2udtlhsql604.prod.harmony.aws2 '/bin/sh -c '"'"'rm -f -r >>>> /home/meggleston/.ansible/tmp/ansible-tmp-1670263853.52-8164-79599240649234/ >>>> > /dev/null 2>&1 && sleep 0'"'"'' >>>> <pa2udtlhsql1020.prod.harmony.aws2> ESTABLISH SSH CONNECTION FOR USER: >>>> None >>>> <pa2udtlhsql1020.prod.harmony.aws2> SSH: EXEC ssh -C -o >>>> ControlMaster=auto -o ControlPersist=60s -o KbdInteractiveAuthentication=no >>>> -o >>>> PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey >>>> -o PasswordAuthentication=no -o ConnectTimeout=10 -o >>>> ControlPath=/home/meggleston/.ansible/cp/3301cea578 >>>> pa2udtlhsql1020.prod.harmony.aws2 '/bin/sh -c '"'"'rm -f -r >>>> /home/meggleston/.ansible/tmp/ansible-tmp-1670263852.15-8057-21113899783559/ >>>> > /dev/null 2>&1 && sleep 0'"'"'' >>>> <pa2udtlhsql602.prod.harmony.aws2> ESTABLISH SSH CONNECTION FOR USER: >>>> None >>>> <pa2udtlhsql602.prod.harmony.aws2> SSH: EXEC ssh -C -o >>>> ControlMaster=auto -o ControlPersist=60s -o KbdInteractiveAuthentication=no >>>> -o >>>> PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey >>>> -o PasswordAuthentication=no -o ConnectTimeout=10 -o >>>> ControlPath=/home/meggleston/.ansible/cp/f012ac57b9 >>>> pa2udtlhsql602.prod.harmony.aws2 '/bin/sh -c '"'"'rm -f -r >>>> /home/meggleston/.ansible/tmp/ansible-tmp-1670263852.91-8148-50804275661258/ >>>> > /dev/null 2>&1 && sleep 0'"'"'' >>>> <pa2udtlhsql1022.prod.harmony.aws2> ESTABLISH SSH CONNECTION FOR USER: >>>> None >>>> <pa2udtlhsql1022.prod.harmony.aws2> SSH: EXEC ssh -C -o >>>> ControlMaster=auto -o ControlPersist=60s -o KbdInteractiveAuthentication=no >>>> -o >>>> PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey >>>> -o PasswordAuthentication=no -o ConnectTimeout=10 -o >>>> ControlPath=/home/meggleston/.ansible/cp/a501b68168 >>>> pa2udtlhsql1022.prod.harmony.aws2 '/bin/sh -c '"'"'rm -f -r >>>> /home/meggleston/.ansible/tmp/ansible-tmp-1670263852.07-8072-136961495388876/ >>>> > /dev/null 2>&1 && sleep 0'"'"'' >>>> ERROR! Unexpected Exception, this is probably a bug: [Errno 12] Cannot >>>> allocate memory >>>> the full traceback was: >>>> >>>> Traceback (most recent call last): >>>> File "/usr/bin/ansible-playbook", line 123, in <module> >>>> exit_code = cli.run() >>>> File "/usr/lib/python2.7/site-packages/ansible/cli/playbook.py", line >>>> 128, in run >>>> results = pbex.run() >>>> File >>>> "/usr/lib/python2.7/site-packages/ansible/executor/playbook_executor.py", >>>> line 169, in run >>>> result = self._tqm.run(play=play) >>>> File >>>> "/usr/lib/python2.7/site-packages/ansible/executor/task_queue_manager.py", >>>> line 282, in run >>>> play_return = strategy.run(iterator, play_context) >>>> File >>>> "/usr/lib/python2.7/site-packages/ansible/plugins/strategy/linear.py", line >>>> 311, in run >>>> self._queue_task(host, task, task_vars, play_context) >>>> File >>>> "/usr/lib/python2.7/site-packages/ansible/plugins/strategy/__init__.py", >>>> line 390, in _queue_task >>>> worker_prc.start() >>>> File >>>> "/usr/lib/python2.7/site-packages/ansible/executor/process/worker.py", line >>>> 100, in start >>>> return super(WorkerProcess, self).start() >>>> File "/usr/lib64/python2.7/multiprocessing/process.py", line 130, in >>>> start >>>> self._popen = Popen(self) >>>> File "/usr/lib64/python2.7/multiprocessing/forking.py", line 121, in >>>> __init__ >>>> self.pid = os.fork() >>>> >>>> When I run a stupid playbook with the command: anssible-playbook -vvv >>>> 1.yml >>>> >>>> for the playbook: >>>> — >>>> - hosts: all >>>> become: yes >>>> gather_facts: true >>>> >>>> tasks: >>>> - name: “remove the file” >>>> file: >>>> path=/tmp/getspace.sh >>>> state=absent >>>> >>>> I added the “-vvv” when the previous run told me to. Any ideas what’s >>>> going on (besides the obvious “out of memory”) and how to fix this? >>>> >>>> Mike >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Ansible Project" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ansible-project/83646132-5874-4829-9152-127bee997178n%40googlegroups.com >>> <https://groups.google.com/d/msgid/ansible-project/83646132-5874-4829-9152-127bee997178n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >>> >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Ansible Project" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ansible-project/bda55e7c-e0ac-4da2-ab19-5ce504218d9dn%40googlegroups.com >> <https://groups.google.com/d/msgid/ansible-project/bda55e7c-e0ac-4da2-ab19-5ce504218d9dn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> >> > -- > You received this message because you are subscribed to the Google Groups > "Ansible Project" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ansible-project/79eec9ab-8973-4be5-8a66-b122c96c6fa7n%40googlegroups.com > <https://groups.google.com/d/msgid/ansible-project/79eec9ab-8973-4be5-8a66-b122c96c6fa7n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > > > > -- > You received this message because you are subscribed to the Google Groups > "Ansible Project" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ansible-project/738861CE-F899-46B2-9C9F-2532BA2D0DA6%40gmail.com > <https://groups.google.com/d/msgid/ansible-project/738861CE-F899-46B2-9C9F-2532BA2D0DA6%40gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Ansible Project" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ansible-project/CAFtje5MRZ1H%2B2KJFAGUr46wpSLXj8DHOFfZ92d2d5s3CZiVmsQ%40mail.gmail.com.
