I have a blockinfile task that sets some lines in /etc/ufw/before.rules,
and which notifies handler to reload ufw if the task registers a change. I
was running it on a host and noticed that I had the same prerouting rule
from before.rules multiple times, so I took a closer look at the task as I
was running it, and I noticed that it keeps triggering every time it runs.
Here are mytasks the add pre and post routing rules to
/etc/ufw/before.rules:
- name: set nat and port forwarding start section
blockinfile:
dest: /etc/ufw/before.rules
marker: "# {mark} bbg nat rules"
insertbefore: "# Don't delete these required lines, otherwise there
will be errors"
block: |
# NAT table rules
*nat
:PREROUTING ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
when: firewall.nat is defined or firewall.pf is defined
notify:
- reload ufw
- name: set individual port forwarding rules if specified
blockinfile:
dest: /etc/ufw/before.rules
insertafter: "# END bbg nat rules"
marker: "# {mark} {{ item.desc|default(omit) }}"
block: |
# Forward port for {{ item.desc }}
-A PREROUTING -p tcp --dport {{ item.src_port }} -j REDIRECT
--to-port {{ item.dst_port }}
with_items: "{{ firewall.pf|default(omit) }}"
when: firewall.pf is defined
notify:
- reload ufw
- name: set individual nat rules if specified
blockinfile:
dest: /etc/ufw/before.rules
insertbefore: "# BEGIN bbg nat rules commit"
marker: "# {mark} {{ item.desc|default(omit) }}"
block: |
# Forward traffic through {{ item.out_in|default(eth0) }} - Change to
match you out-interface for {{ item.desc|default(omit) }}
-A POSTROUTING -s {{ item.source|default("0.0.0.0/0") }} -d {{
item.dest|default("0.0.0.0/0") }} -o {{ item.out_in|default(eth0) }} -j
MASQUERADE
with_items: "{{ firewall.nat|default(omit) }}"
when: firewall.nat is defined
notify:
- reload ufw
- name: set nat rules commit if specified
blockinfile:
dest: /etc/ufw/before.rules
marker: "# {mark} bbg nat rules commit"
insertbefore: "# Don't delete these required lines, otherwise there
will be errors"
block: |
# don't delete the 'COMMIT' line or these nat table rules won't
# be processed
COMMIT
when: firewall.nat is defined or firewall.pf is defined
notify:
- reload ufw
The rule that keeps triggering is the 2nd one, set individual port
forwarding rules if specified.
I can't see that it's changing anything in the file after it initially adds
the lines, and in fact I did a test and ran a checksum against the file
before and after running the playbook and the checksum value was the same,
so it hasn't changed the file in any way.
Can anyone explain why it keeps triggering and running the ufw reload?
Thanks,
Guy
--
You received this message because you are subscribed to the Google Groups
"Ansible Project" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/ansible-project/CANNH9mu7hexGko7oXq7SHBjLH1im0FyktxxkFrMHgsMqU01%3Dtg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
