Hi,
As mentioned in subject line i need to configure can interface at boot time
im using TI's Jacinto6evm board.
Manually i configured it with commands.
su ip link set can0 type can bitrate 500000
su ifconfig can0 up
Respective can drivers built as a kernel module and loaded properly checked
using
lsmod | grep can
can_gw 8564 0
can_bcm 14307 0
can_raw 6781 1
can 29922 3
can_gw,can_bcm,can_raw
c_can_platform 6830 0
c_can 9697 1 c_can_platform
can_dev 12389 1 c_can
For make it up at system-boot made entry in "init.rc" in AOSP at path :
$AOSP//system/core/rootdir/init.rc as shown below
on boot
su ip link set can0 type can bitrate 500000
su ifconfig can0 up
Its not getting up if i check it with command "ifconfig"
It logged error which i viewed using "dmesg"
[ 3.952061] init: /init.rc: 535: invalid
keyword 'su'
[ 3.959166] init: /init.rc: 536: invalid
keyword 'su'
Even tried without "su" i.e.
ip link set can0 type can bitrate 500000
su ifconfig can0 up
In this case logged error which i viewed using "dmesg"
[ 3.912085] init: /init.rc: 535: invalid
keyword 'ip
--
--
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting
---
You received this message because you are subscribed to the Google Groups
"android-porting" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
