Due to FPO, firmware will try to change OTG timings, which would only latch if min/max selectors for vtotal are written by the driver.
Signed-off-by: Aurabindo Pillai <[email protected]> --- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c | 15 +++------------ drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c | 6 ++++++ 2 files changed, 9 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c index e1975991e075..633989fd2514 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c @@ -930,19 +930,10 @@ void optc1_set_drr( OTG_FORCE_LOCK_ON_EVENT, 0, OTG_SET_V_TOTAL_MIN_MASK_EN, 0, OTG_SET_V_TOTAL_MIN_MASK, 0); - - // Setup manual flow control for EOF via TRIG_A - optc->funcs->setup_manual_trigger(optc); - - } else { - REG_UPDATE_4(OTG_V_TOTAL_CONTROL, - OTG_SET_V_TOTAL_MIN_MASK, 0, - OTG_V_TOTAL_MIN_SEL, 0, - OTG_V_TOTAL_MAX_SEL, 0, - OTG_FORCE_LOCK_ON_EVENT, 0); - - optc->funcs->set_vtotal_min_max(optc, 0, 0); } + + // Setup manual flow control for EOF via TRIG_A + optc->funcs->setup_manual_trigger(optc); } void optc1_set_vtotal_min_max(struct timing_generator *optc, int vtotal_min, int vtotal_max) diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c index e0edc163d767..042ce082965f 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c @@ -455,6 +455,12 @@ void optc2_setup_manual_trigger(struct timing_generator *optc) { struct optc *optc1 = DCN10TG_FROM_TG(optc); + REG_UPDATE_4(OTG_V_TOTAL_CONTROL, + OTG_V_TOTAL_MIN_SEL, 1, + OTG_V_TOTAL_MAX_SEL, 1, + OTG_FORCE_LOCK_ON_EVENT, 0, + OTG_SET_V_TOTAL_MIN_MASK, (1 << 1)); /* TRIGA */ + REG_SET_8(OTG_TRIGA_CNTL, 0, OTG_TRIGA_SOURCE_SELECT, 21, OTG_TRIGA_SOURCE_PIPE_SELECT, optc->inst, -- 2.40.1
