[Public] Apologize for sending out the patch with the wrong sensitivity a few seconds ago. I've updated sensitivity policy to "Public" here.
Thanks, Zhan > -----Original Message----- > From: amd-gfx <[email protected]> On Behalf Of Liu, Zhan > Sent: 2022/January/19, Wednesday 5:19 PM > To: [email protected] > Cc: Liu, Charlene <[email protected]>; Kotarac, Pavle > <[email protected]>; Pierre-Loup Griffais <[email protected]>; > Gutierrez, Agustin <[email protected]>; Cornij, Nikola > <[email protected]> > Subject: [PATCH] drm/amd/display: Shorten delay time to 1us while resetting > FIFO > > [Why] > Current FIFO reset delay for dcn10 is 100us, which is too long and will fail > atomic > flip. As a result, there will be no display on boot. > > [How] > Shorten delay time to 1us. This also aligns with FIFO reset delay on other > ASICs. > > Signed-off-by: Zhan Liu <[email protected]> > --- > drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c > b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c > index bf4436d7aaab..2077c22befa5 100644 > --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c > +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c > @@ -909,7 +909,7 @@ void enc1_stream_encoder_reset_fifo( > > /* set DIG_START to 0x1 to reset FIFO */ > REG_UPDATE(DIG_FE_CNTL, DIG_START, 1); > - udelay(100); > + udelay(1); > > /* write 0 to take the FIFO out of reset */ > REG_UPDATE(DIG_FE_CNTL, DIG_START, 0); > -- > 2.25.1
