This can also help to maintain clear code layer.
Change-Id: I9bf6a7bb93112ae40bd549ee4d7afb42a968aacf
Signed-off-by: Evan Quan <[email protected]>
---
drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 33 ++++++++++++++-
drivers/gpu/drm/amd/powerplay/arcturus_ppt.c | 1 -
.../gpu/drm/amd/powerplay/inc/amdgpu_smu.h | 1 -
drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h | 2 -
drivers/gpu/drm/amd/powerplay/navi10_ppt.c | 1 -
.../drm/amd/powerplay/sienna_cichlid_ppt.c | 1 -
drivers/gpu/drm/amd/powerplay/smu_internal.h | 1 -
drivers/gpu/drm/amd/powerplay/smu_v11_0.c | 42 -------------------
8 files changed, 31 insertions(+), 51 deletions(-)
diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
index 38b3b47d12b7..3d62a99bad84 100644
--- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
@@ -33,6 +33,7 @@
#include "navi10_ppt.h"
#include "sienna_cichlid_ppt.h"
#include "renoir_ppt.h"
+#include "amd_pcie.h"
/*
* DO NOT use these for err/warn/info/debug messages.
@@ -993,6 +994,7 @@ static int smu_sw_fini(void *handle)
static int smu_smc_hw_setup(struct smu_context *smu)
{
struct amdgpu_device *adev = smu->adev;
+ uint32_t pcie_gen = 0, pcie_width = 0;
int ret;
if (smu_is_dpm_running(smu) && adev->in_suspend) {
@@ -1062,9 +1064,36 @@ static int smu_smc_hw_setup(struct smu_context *smu)
if (!smu_is_dpm_running(smu))
dev_info(adev->dev, "dpm has been disabled\n");
- ret = smu_override_pcie_parameters(smu);
- if (ret)
+ if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN4)
+ pcie_gen = 3;
+ else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3)
+ pcie_gen = 2;
+ else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN2)
+ pcie_gen = 1;
+ else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN1)
+ pcie_gen = 0;
+
+ /* Bit 31:16: LCLK DPM level. 0 is DPM0, and 1 is DPM1
+ * Bit 15:8: PCIE GEN, 0 to 3 corresponds to GEN1 to GEN4
+ * Bit 7:0: PCIE lane width, 1 to 7 corresponds is x1 to x32
+ */
+ if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X16)
+ pcie_width = 6;
+ else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X12)
+ pcie_width = 5;
+ else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X8)
+ pcie_width = 4;
+ else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X4)
+ pcie_width = 3;
+ else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X2)
+ pcie_width = 2;
+ else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X1)
+ pcie_width = 1;
+ ret = smu_update_pcie_parameters(smu, pcie_gen, pcie_width);
+ if (ret) {
+ dev_err(adev->dev, "Attempt to override pcie params failed!\n");
return ret;
+ }
ret = smu_enable_thermal_alert(smu);
if (ret) {
diff --git a/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
b/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
index afd07c497205..3687e7620eb8 100644
--- a/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/arcturus_ppt.c
@@ -2422,7 +2422,6 @@ static const struct pptable_funcs arcturus_ppt_funcs = {
.baco_exit = smu_v11_0_baco_exit,
.get_dpm_ultimate_freq = smu_v11_0_get_dpm_ultimate_freq,
.set_soft_freq_limited_range = smu_v11_0_set_soft_freq_limited_range,
- .override_pcie_parameters = NULL,
.set_df_cstate = arcturus_set_df_cstate,
.allow_xgmi_power_down = arcturus_allow_xgmi_power_down,
.log_thermal_throttling_event = arcturus_log_thermal_throttling_event,
diff --git a/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h
b/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h
index 470b0377a860..ba8e162f44ab 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h
@@ -566,7 +566,6 @@ struct pptable_funcs {
int (*mode2_reset)(struct smu_context *smu);
int (*get_dpm_ultimate_freq)(struct smu_context *smu, enum smu_clk_type
clk_type, uint32_t *min, uint32_t *max);
int (*set_soft_freq_limited_range)(struct smu_context *smu, enum
smu_clk_type clk_type, uint32_t min, uint32_t max);
- int (*override_pcie_parameters)(struct smu_context *smu);
int (*disable_umc_cdr_12gbps_workaround)(struct smu_context *smu);
int (*set_power_source)(struct smu_context *smu, enum
smu_power_src_type power_src);
void (*log_thermal_throttling_event)(struct smu_context *smu);
diff --git a/drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h
b/drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h
index 14d6eef8cf17..311166f1975c 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/smu_v11_0.h
@@ -268,8 +268,6 @@ int smu_v11_0_set_hard_freq_limited_range(struct
smu_context *smu,
uint32_t min,
uint32_t max);
-int smu_v11_0_override_pcie_parameters(struct smu_context *smu);
-
int smu_v11_0_set_performance_level(struct smu_context *smu,
enum amd_dpm_forced_level level);
diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
index 6d638a67bc4d..3db5e663aa6f 100644
--- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
@@ -2435,7 +2435,6 @@ static const struct pptable_funcs navi10_ppt_funcs = {
.baco_exit = smu_v11_0_baco_exit,
.get_dpm_ultimate_freq = smu_v11_0_get_dpm_ultimate_freq,
.set_soft_freq_limited_range = smu_v11_0_set_soft_freq_limited_range,
- .override_pcie_parameters = smu_v11_0_override_pcie_parameters,
.set_default_od_settings = navi10_set_default_od_settings,
.od_edit_dpm_table = navi10_od_edit_dpm_table,
.run_btc = navi10_run_btc,
diff --git a/drivers/gpu/drm/amd/powerplay/sienna_cichlid_ppt.c
b/drivers/gpu/drm/amd/powerplay/sienna_cichlid_ppt.c
index 141944df97b0..7a108676f90a 100644
--- a/drivers/gpu/drm/amd/powerplay/sienna_cichlid_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/sienna_cichlid_ppt.c
@@ -2551,7 +2551,6 @@ static const struct pptable_funcs
sienna_cichlid_ppt_funcs = {
.baco_exit = smu_v11_0_baco_exit,
.get_dpm_ultimate_freq = sienna_cichlid_get_dpm_ultimate_freq,
.set_soft_freq_limited_range = smu_v11_0_set_soft_freq_limited_range,
- .override_pcie_parameters = smu_v11_0_override_pcie_parameters,
.set_thermal_range = sienna_cichlid_set_thermal_range,
};
diff --git a/drivers/gpu/drm/amd/powerplay/smu_internal.h
b/drivers/gpu/drm/amd/powerplay/smu_internal.h
index 6eb375af543d..5deb30452ff8 100644
--- a/drivers/gpu/drm/amd/powerplay/smu_internal.h
+++ b/drivers/gpu/drm/amd/powerplay/smu_internal.h
@@ -90,7 +90,6 @@
#define smu_get_dpm_ultimate_freq(smu, param, min, max)
smu_ppt_funcs(get_dpm_ultimate_freq, 0, smu, param, min, max)
#define smu_asic_set_performance_level(smu, level)
smu_ppt_funcs(set_performance_level, -EINVAL, smu, level)
#define smu_dump_pptable(smu)
smu_ppt_funcs(dump_pptable, 0, smu)
-#define smu_override_pcie_parameters(smu)
smu_ppt_funcs(override_pcie_parameters, 0, smu)
#define smu_update_pcie_parameters(smu, pcie_gen_cap, pcie_width_cap)
smu_ppt_funcs(update_pcie_parameters, 0, smu, pcie_gen_cap, pcie_width_cap)
#define smu_set_thermal_range(smu, range)
smu_ppt_funcs(set_thermal_range, 0, smu, range)
#define smu_disable_umc_cdr_12gbps_workaround(smu)
smu_ppt_funcs(disable_umc_cdr_12gbps_workaround, 0, smu)
diff --git a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
index 1ed5ac946c05..34bb0f0320f6 100644
--- a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
+++ b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c
@@ -35,7 +35,6 @@
#include "smu_v11_0.h"
#include "soc15_common.h"
#include "atom.h"
-#include "amd_pcie.h"
#include "amdgpu_ras.h"
#include "asic_reg/thm/thm_11_0_2_offset.h"
@@ -1823,47 +1822,6 @@ int smu_v11_0_set_hard_freq_limited_range(struct
smu_context *smu,
return ret;
}
-int smu_v11_0_override_pcie_parameters(struct smu_context *smu)
-{
- struct amdgpu_device *adev = smu->adev;
- uint32_t pcie_gen = 0, pcie_width = 0;
- int ret;
-
- if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN4)
- pcie_gen = 3;
- else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3)
- pcie_gen = 2;
- else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN2)
- pcie_gen = 1;
- else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN1)
- pcie_gen = 0;
-
- /* Bit 31:16: LCLK DPM level. 0 is DPM0, and 1 is DPM1
- * Bit 15:8: PCIE GEN, 0 to 3 corresponds to GEN1 to GEN4
- * Bit 7:0: PCIE lane width, 1 to 7 corresponds is x1 to x32
- */
- if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X16)
- pcie_width = 6;
- else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X12)
- pcie_width = 5;
- else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X8)
- pcie_width = 4;
- else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X4)
- pcie_width = 3;
- else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X2)
- pcie_width = 2;
- else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X1)
- pcie_width = 1;
-
- ret = smu_update_pcie_parameters(smu, pcie_gen, pcie_width);
-
- if (ret)
- dev_err(adev->dev, "[%s] Attempt to override pcie params
failed!\n", __func__);
-
- return ret;
-
-}
-
int smu_v11_0_set_performance_level(struct smu_context *smu,
enum amd_dpm_forced_level level)
{
--
2.27.0
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
