From: Yongqiang Sun <[email protected]> [Why] Underflow is observed when plug in a 4K@60 monitor with 1366x768 eDP due to DPPCLK is too low.
[How] Limit minimum DPPCLK to 100MHz. Signed-off-by: Yongqiang Sun <[email protected]> Reviewed-by: Eric Yang <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> --- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c index 8ecb98c29eb9..5d82ec1f1ce5 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c @@ -151,6 +151,12 @@ void rn_update_clocks(struct clk_mgr *clk_mgr_base, rn_vbios_smu_set_min_deep_sleep_dcfclk(clk_mgr, clk_mgr_base->clks.dcfclk_deep_sleep_khz); } + // workaround: Limit dppclk to 100Mhz to avoid lower eDP panel switch to plus 4K monitor underflow. + if (!IS_DIAG_DC(dc->ctx->dce_environment)) { + if (new_clocks->dppclk_khz < 100000) + new_clocks->dppclk_khz = 100000; + } + if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, clk_mgr->base.clks.dppclk_khz)) { if (clk_mgr->base.clks.dppclk_khz > new_clocks->dppclk_khz) dpp_clock_lowered = true; -- 2.17.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
