From: Ken Chalmers <[email protected]> Maximus testing now defaults to a 700 MHz emulated dispclk
Signed-off-by: Ken Chalmers <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> --- drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c index 31280d252753..5036b674f68b 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c @@ -908,19 +908,9 @@ static bool dce110_program_pix_clk( #if defined(CONFIG_DRM_AMD_DC_DCN1_0) if (IS_FPGA_MAXIMUS_DC(clock_source->ctx->dce_environment)) { unsigned int inst = pix_clk_params->controller_id - CONTROLLER_ID_D0; - unsigned dp_dto_ref_kHz = 600000; - /* DPREF clock from FPGA TODO: Does FPGA have this value? */ + unsigned dp_dto_ref_kHz = 700000; unsigned clock_kHz = pll_settings->actual_pix_clk; - /* For faster simulation, if mode pixe clock less than 290MHz, - * pixel clock can be hard coded to 290Mhz. For 4K mode, pixel clock - * is greater than 500Mhz, need real pixel clock - * clock_kHz = 290000; - */ - /* TODO: un-hardcode when we can set display clock properly*/ - /*clock_kHz = pix_clk_params->requested_pix_clk;*/ - clock_kHz = 290000; - /* Set DTO values: phase = target clock, modulo = reference clock */ REG_WRITE(PHASE[inst], clock_kHz); REG_WRITE(MODULO[inst], dp_dto_ref_kHz); -- 2.14.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
