From: Ray Wu <[email protected]> Some HDMI sinks need additional GCP packets to properly process the mute state before the timing generator is disabled, especially after link re-establishment with HDMI 2.0 scrambling enabled. Waiting for only 2 frames is insufficient for certain monitor firmware, resulting in garbled display output on resume from suspend.
Increase the AV mute wait in dcn30_set_avmute() from 2 to 3 frames to ensure the sink receives enough GCP packets. Assisted-by: Cursor:Claude-Opus-4.6 Reviewed-by: Wayne Lin <[email protected]> Signed-off-by: Ray Wu <[email protected]> --- .../drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c index aed9d06ec538..aa7707b2b25b 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c @@ -849,13 +849,19 @@ void dcn30_set_avmute(struct pipe_ctx *pipe_ctx, bool enable) pipe_ctx->stream_res.stream_enc, enable); - /* Wait for two frame to make sure AV mute is sent out */ + /* Wait for three frames to make sure AV mute is sent out. + * Some HDMI sinks need additional GCP packets to properly + * process the mute state, especially after link re-establishment + * with HDMI 2.0 scrambling enabled. + */ if (enable && pipe_ctx->stream_res.tg->funcs->is_tg_enabled(pipe_ctx->stream_res.tg)) { + int i; + pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VACTIVE); - pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VBLANK); - pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VACTIVE); - pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VBLANK); - pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VACTIVE); + for (i = 0; i < 3; i++) { + pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VBLANK); + pipe_ctx->stream_res.tg->funcs->wait_for_state(pipe_ctx->stream_res.tg, CRTC_STATE_VACTIVE); + } } } } -- 2.43.0
