Please use if (amdgpu_sriov_vf()) To protect your added part -----Original Message----- From: Pixel Ding [mailto:[email protected]] Sent: 2017年10月17日 14:38 To: [email protected]; Liu, Monk <[email protected]>; Koenig, Christian <[email protected]> Cc: Li, Bingley <[email protected]>; Sun, Gary <[email protected]>; Ding, Pixel <[email protected]> Subject: [PATCH 2/3] drm/amdgpu: report more amdgpu_fence_info v2
From: pding <[email protected]> Only for GFX ring. This can help checking MCBP feature. v2: report more fence offs. The fence at the end of the frame will indicate the completion status. If the frame completed normally, the fence is written to the address given in the EVENT_WRITE_EOP packet. If preemption occurred in the previous IB the address is adjusted by 2 DWs. If work submitted in the frame was reset before completion, the fence address is adjusted by four DWs. In the case that preemption occurred, and before preemption completed a reset was initiated, the address will be adjusted with six DWs Signed-off-by: pding <[email protected]> --- drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c index 09d5a5c..688740e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c @@ -645,6 +645,19 @@ static int amdgpu_debugfs_fence_info(struct seq_file *m, void *data) atomic_read(&ring->fence_drv.last_seq)); seq_printf(m, "Last emitted 0x%08x\n", ring->fence_drv.sync_seq); + + if (ring->funcs->type != AMDGPU_RING_TYPE_GFX) + continue; + + /* set in CP_VMID_PREEMPT and preemption occurred */ + seq_printf(m, "Last preempted 0x%08x\n", + le32_to_cpu(*(ring->fence_drv.cpu_addr + 2))); + /* set in CP_VMID_RESET and reset occurred */ + seq_printf(m, "Last reset 0x%08x\n", + le32_to_cpu(*(ring->fence_drv.cpu_addr + 4))); + /* Both preemption and reset occurred */ + seq_printf(m, "Last both 0x%08x\n", + le32_to_cpu(*(ring->fence_drv.cpu_addr + 6))); } return 0; } -- 2.9.5 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
