From: Wenjing Liu <[email protected]> This reverts commit 6cf00f4c4d5c ("drm/amd/display: Remove pixle rate limit for subvp")
[why] The original commit causes a regression when subvp is applied on ODM required 8k60hz timing. The display shows black screen on boot. The issue can be recovered with hotplug. It also causes MPO to fail. We will temprarily revert this commit and investigate the root cause further. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Chaitanya Dhere <[email protected]> Reviewed-by: Martin Leung <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> --- drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index b49e1dc9d8ba..a0a65e099104 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -623,6 +623,7 @@ static bool dcn32_assign_subvp_pipe(struct dc *dc, * - Not TMZ surface */ if (pipe->plane_state && !pipe->top_pipe && !dcn32_is_center_timing(pipe) && + !(pipe->stream->timing.pix_clk_100hz / 10000 > DCN3_2_MAX_SUBVP_PIXEL_RATE_MHZ) && (!dcn32_is_psr_capable(pipe) || (context->stream_count == 1 && dc->caps.dmub_caps.subvp_psr)) && dc_state_get_pipe_subvp_type(context, pipe) == SUBVP_NONE && (refresh_rate < 120 || dcn32_allow_subvp_high_refresh_rate(dc, context, pipe)) && -- 2.37.3
