#BM 18.09.2002

firstslot=1             #### 1st tape slot
lastslot=7             #### Last tape slot
#cleanslot=7             #### Slot with cleaner tape

   # Do you want to clean the drive after a certain number of accesses?
   # NOTE - This is unreliable, since 'accesses' aren't 'uses', and we
   #        have no reliable way to count this. A single amcheck could
   #        generate as many accesses as slots you have, plus 1.
   # ALSO NOTE - many modern tape loaders handle this automatically.

AUTOCLEAN=0             #### Set to '1' or greater to enable

autocleancount=99       #### Number of access before a clean.

havereader=0            #### If you have a barcode reader, set to 1.

offlinestatus=1         #### Set to 0 if 'mt status' gives an
                         #### "offline" when drive is offline.
                         #### Set to 1 or greater if 'mt status'
                         #### doesn't give and offline, rather an
                         #### "ONLINE" when drive is online.

OFFLINE_BEFORE_UNLOAD=1 #### Does your tape driver require a
                         #### 'mt offline' before mtx unload?

