Ok, you mean you get the same error with /dev/nst0 or do you say with /dev/nst0 it restores Ok? your message is a bit short to know what you want to say... ;-) Christoph
PS: please cc to the list also, so the other guy's out there see whats going on... "Davidson, Brian" schrieb: > > It's /dev/nst0. I had just check my BSDI box which uses nrst0 > > Thanks! > > > -----Original Message----- > > From: Christoph Scheeder [mailto:[EMAIL PROTECTED]] > > Sent: Thursday, April 04, 2002 10:34 AM > > To: Davidson, Brian > > Cc: [EMAIL PROTECTED] > > Subject: Re: amrestore problem > > > > > > Hi, > > use /dev/nst0 as tape-device and you should be fine.... > > Christoph > > > > "Davidson, Brian" schrieb: > > > > > > Tried looking in the FAQ first but didn't come up with anything. > > > > > > Anyway I have amanda installed on a Linux Redhat 7.2 box, > > using version > > > 2.4.3b2-20020308 > > > > > > Backup seem to perform normally, but decided to verify by > > doing a restore > > > and got the following error: > > > > > > sh-2.05$ /usr/local/sbin/amrestore -p /dev/nrst0 sunshine hda2 | > > > /sbin/restore -ivf - > > > amrestore: could not stat /dev/nrst0 > > > > > > Verify tape and initialize maps > > > > > > Input is from file/pipe > > > > > > /sbin/restore: Tape read error on first record > > > > > > Any ideas here? > > > > > > Brian Davidson > > > 11710 Plaza America Drive > > > Reston, Virginia 20190 > > > 703.261.4694 > > > 703.261.5086 Fax > >
