When I specify aplay -D hw:3 or -D hw:0,3 I get errors, if I just do
aplay it works??? WHY?
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708B Analog [VT1708B Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
00:07.0 0403: 10de:0774 (rev a1)
This is my audio device.
aplay -D hw:3 /usr/share/sounds/alsa/Front_Center.wav
ALSA lib pcm_hw.c:1429:(_snd_pcm_hw_open) Invalid value for card
aplay: main:590: audio open error: No such file or directory
[r...@devgeisquad ~]# aplay -D hw:0,3
/usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit
Little Endian, Rate 48000 Hz, Mono
aplay: set_params:966: Channels count non available
asound.conf is:
# Set default sound card
# Useful so that all settings can be changed to a different card here.
pcm.snd_card {
type hw
card 0
device 3
}
# Allow mixing of multiple output streams to this device
pcm.output {
type dmix
ipc_key 1024
ipc_perm 0660 # Sound for everybody in your group!
slave.pcm "snd_card"
slave {
# This stuff provides some fixes for latency issues.
# buffer_size should be set for your audio chipset.
period_time 0
period_size 1024
buffer_size 8192
}
bindings {
0 0
1 1
}
}
# Allow reading from the default device.
# Also known as record or capture.
pcm.input {
type dsnoop
ipc_key 2048
slave.pcm "snd_card"
## Possible artsd full duplex fix:
# slave {
# period_time 0
# period_size 1024
# buffer_size 8192
# }
bindings {
0 0
1 1
}
}
# This is what we want as our default device
# a fully duplex (read/write) audio device.
pcm.duplex {
type asym
playback.pcm "output"
capture.pcm "input"
}
###################
# CONVERSION PLUG #
###################
# Setting the default pcm device allows the conversion
# rate to be selected on the fly.
# duplex mode allows any alsa enabled app to read/write
# to the dmix plug (Fixes a problem with wine).
pcm.!default {
type plug
slave.pcm "duplex"
}
# Apparently this is wrong (breaks mplayer for me opening the device)
#ctl.!default {
# type plug
# slave.pcm "snd_card"
#}
########
# AOSS #
########
# OSS dsp0 device (OSS needs only output support, duplex will break some stuff)
pcm.dsp0 {
type plug
slave.pcm "output"
}
# OSS control for dsp0 (needed?...this might not be useful)
ctl.dsp0 {
type plug
slave.pcm "snd_card"
}
# OSS control for dsp0 (default old OSS is mixer0)
ctl.mixer0 {
type plug
slave.pcm "snd_card"
}
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Alsa-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-user
