Thanks Yan I did actually read this in my research. The documentation was a little too brief for me to extrapolate out for my needs. It may actually fix another problem I have with the default card but not this issue, which is to setup all MIDI devices in a specific order to make life easy.
I need all MIDI devices in my setup and I can't intuitively see how this will set the order in which the MIDI ports appear in ALSA (and hence jack midi as a flow on). I will try and work it out.. but I just can't see it from this yet. cheers Allan On Thu Jan 22 12:37 , Yan Seiner sent: >[email protected] wrote: >> >> Hi All >> >> Firstly thanks to all the people who responded last time. >> I have tried the simpler methods (modprobe.conf) without success as 2 of my >> devices have the same vendor ID and product ID even though they are >> different models. (emagic AMT8 and emagic Unitor 8 mk II). >> >> So it looks like I have to use the udev method. Unfortunately I am having a >> hard time following the documentation, especially with assigning the order >> by bus location rather than VID and PID... I'm fairly technical, but I'm >> just not getting the doco in this case.. so please don't RTFM me.. >> >> Does anyone have an example of their UDEV rules for 2 identical devices or >> one that uses bus location rather than VID and PID they could send me? >> >Sorry but RTFM this one.... > >http://wiki.c3sl.ufpr.br/multiseat/index.php/How_to_make_the_sound_work > >It should help you out. While it's written for mdm, you can work it out >and you don't need udev at all. Just use it to set ALSA_CARD to >whatever card you want to use. > >--Yan > >) ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Alsa-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/alsa-user
