James,
On Thu, 2008-02-14 at 06:43 -0600, James Shatto wrote:
> > strace arecord -d 10 -f cd -t wav -D copy foobar.wav
>
> try:
>
> arecord -d 10 -f S16_LE -r 44100 -c 2 -t wav -D copy foobar.wav
> or
> arecord -d 10 -f cd -t wav -D hw:0 foobar.wav
>
> Make sure copy is the right alias in your .asoundrc, otherwise you might need
> to use the card number (/proc/asound/cards (-D hw:0)). The "-f S16_LE -r
> 44100 -c 2" is the long hand of -f cd. Long hand is easier to modify, if you
> want to use a different rate, or only one channel(mono).
I tried the second and got:
$ arecord -d 10 -f cd -t wav -D hw:0 foobar.wav
Recording WAVE 'foobar.wav' : Signed 16 bit Little Endian, Rate 44100
Hz, Stereo
Warning: rate is not accurate (requested = 44100Hz, got = 48000Hz)
please, try the plug plugin
arecord: pcm_read:1347: read error: Input/output error
and I get a 44 byte foobar.wav file. My .asoundrc is:
pcm.copy {
type plug
slave {
pcm hw
}
route_policy copy
}
Thanks,
Phil.
--
Philip Rhoades
Pricom Pty Limited (ACN 003 252 275 ABN 91 003 252 275)
GPO Box 3411
Sydney NSW 2001
Australia
Fax: +61:(0)2-8221-9599
E-mail: [EMAIL PROTECTED]
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Alsa-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-user
