Hi,
I have two cards - one is PCI SoundBlaster 512
and another - USB iMic:
% cat /proc/asound/cards
0 [Live ]: EMU10K1 - Sound Blaster Live!
Sound Blaster Live! (rev.5)
at 0xb000, irq 9
1 [system ]: USB-Audio - iMic USB audio system
Griffin Technology, Inc iMic USB audio
system at usb-00:04.2-2, full speed
Everything works as expected.
I use iMic exclusively for recording from line-in/mic,
and the SBLive with my speakers.
However, while recording from iMic I want to listen to what
is being recorded to monitor level and etc. Right now,
when I start 'arecord' in one xterm window, in another
I run 'aplay' of the recording and listen to it (with
some delay of course).
Is there any other way to record from hw:0,0 to a file and
at the same time route the audio to hw:1,0 in one step?
System: Fedora Core 1.0 2.4.20-8
Alsa: 1.0.4
% cat ~/.asoundrc
pcm.sblive { type hw card 0 }
ctl.sblive { type hw card 0 }
pcm.imic { type hw card 1 }
ctl.imic { type hw card 1 }
pcm.!default {
type plug
slave { pcm "hw:0,0" rate 44100 }
route_policy default
}
thanks in advance,
-Vlad
--
_____________________________________________________________
Vladislav Grinchenko http://home.comcast.net/~3rdshift/
e-mail: [EMAIL PROTECTED]
Focus on quality, and productivity will follow.
_____________________________________________________________
-------------------------------------------------------
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek
For a limited time only, get FREE Ground shipping on all orders of $35
or more. Hurry up and shop folks, this offer expires April 30th!
http://www.thinkgeek.com/freeshipping/?cpg=12297
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
