At Mon, 23 Jun 2003 12:28:15 +0200, Nexx wrote: > > > > Hello > > > > > > can anyone tell my, how I to enable hte analog inputs on my DMX 6Fire > > > > Firstly, are you talking about the TerraTec DMX 6Fire 24/96? If so, have > > you tried to use alsamixer and envy24control to adjust volume settings? > > Make sure the Analog Input Select option in alsamixer is set to front or > > rear, depending on which one you want to use. You don't need to worry about > > this if you are recording from the phono jacks. > > > > Hope this helps > > > > Regards > > Luke > > i tried it (all channels unmuted an volume at its max, analog input front/rear - > tried both). > but it didn't help. When I set analog in to front (should be the frontbox if i > understood it right) > the yellow active-led for the line in should be turned on, right? not mine... > Do i have to set some module options? perhaps it's a driver bug. a bug was fixed today regarding 6fire's inputs on the cvs. please try the cvs version once.
> there's also one strange thing: > on H/W In 7 (Envy24Control) I get a continously very loud noise (master clock at > 96kHz) i think this channel is not used on this hardware. Takashi ------------------------------------------------------- This SF.Net email is sponsored by: INetU Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
