Olaf Giesbrecht wrote: > i have redhat 7.3 with alsa 0.9 [...] and the midisport 8x8 as an usb > midi-interface and i do not get the midi interface to work. would > could i have done wrong ? i thing the firmware-upload has problems > > when i start the midi-interface (turn on power), i get the following in > the /var/log/messages: > (...) > /etc/hotplug/usb/midisport_fw: unknown product 763/1031/105
There are two hardware revisions of the 8x8 (1.10 and 1.21), and the loader has to supply a specific firmware for each of them. Now it seems your device is revision 1.05, and the loader doesn't know about that. The drivers from Midiman's website don't know about 1.05 either as far as I have been able to determine. You could try to edit /etc/hotplug/usb/midisport_fw, replacing "110" with "105", so that the loader will load the firmware for revision 1.1, but I cannot guarantee that your device won't blow up. :-) I guess the device works with your Windows drivers. Please send me your usb8x8ldr.sys file so that I can update the loader with the correct firmware. HTH Clemens ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
