On Sunday 17 November 2002 21:05, Dan Pierce wrote:
> Konstantin Kletschke wrote:
> >Ok, i complained few days ago about cmipci freezes System.
> >
> >It's not Alsa's fault, using Kernel Drivers causes same failure, two or
> >three seconds Sound, then machine freezes, nevertheless if analog or
> >digital or whatsoever oputput is activated.
> >
> >Are there _any_ success storys using the onboard cmi8378 on a SOYO
> >Dragon Ultra KT333 or is this Board a piece of shit at all?! Or VIA?
> >
> >Konsti
>
> I've got a Soyo Dragon KT333 (Black) and haven't had any stability
> problems at all. I'm on a Gentoo Linux system and simply emerged alsa
> rc5. I still cannot get analog 4/6 channel sound to work, but its been
> completely stable otherwise.
Same problem here with an a7v266e running red hat 7.3. 2 channels work ok,
more is horrible, distorted and clicks. I found rc6 by ftp, but result is the
same.
> I have to say that there seems to be a horrible lack of cmipci support
> on this list. I've seen many questions (including my own) go
> unanswered, and most of them aren't RTFM or STFW solvable either. I
If it were working, is this the correct config to play a 1 channel wave file
on all four?
pcm.test{
type plug
slave{
pcm hw:0,0
channels 4
}
ttable.0.0 1
ttable.0.1 1
ttable.0.2 1
ttable.0.3 1
}
aplay stuff.wav -D test
> suggest contacing Takashi Iwai ([EMAIL PROTECTED]) since he is the cmipci
> driver maintainer, but he hasn't replied to me yet either. Good Luck!
same.
Tobias.
-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing
your web site with SSL, click here to get a FREE TRIAL of a Thawte
Server Certificate: http://www.gothawte.com/rd524.html
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
