On Tue, 23 Apr 2002 11:22:06 +0200
[EMAIL PROTECTED] (Frank Noack) wrote:
> Hi
>
> I like to run alsa 0.9.0beta12. My problem is, i cant load the via686 driver.
> I compiled the driver paket with: ./configure --with-debug=detect
> --with-cards=via686 --with-oss=yes --with-sequencer=yes.
> lsmod gives out:
> snd-pcm-oss 47040 0 (autoclean) (unused)
> snd-pcm 61408 0 (autoclean) [snd-pcm-oss]
> snd-timer 12800 0 (autoclean) [snd-pcm]
> snd-mixer-oss 11584 0 (autoclean) [snd-pcm-oss]
> snd 33928 0 (autoclean) [snd-pcm-oss snd-pcm snd-timer
> snd-mixer-oss]
> soundcore 3364 0 (autoclean) [snd]
>
> modprobe says:
> root@franks:/usr/src/alsa-driver-0.9.0beta12 > modprobe -v snd-via686
> /sbin/insmod /lib/modules/2.4.16-4GB/kernel/sound/acore/seq/snd-seq-device.o
> Using /lib/modules/2.4.16-4GB/kernel/sound/acore/seq/snd-seq-device.o
> Symbol version prefix ''
> /sbin/insmod /lib/modules/2.4.16-4GB/kernel/sound/acore/snd-rawmidi.o
> Using /lib/modules/2.4.16-4GB/kernel/sound/acore/snd-rawmidi.o
> /sbin/insmod
> /lib/modules/2.4.16-4GB/kernel/sound/drivers/mpu401/snd-mpu401-uart.o
> Using /lib/modules/2.4.16-4GB/kernel/sound/drivers/mpu401/snd-mpu401-uart.o
> /sbin/insmod /lib/modules/2.4.16-4GB/kernel/sound/pci/ac97/snd-ac97-codec.o
> Using /lib/modules/2.4.16-4GB/kernel/sound/pci/ac97/snd-ac97-codec.o
> /sbin/insmod /lib/modules/2.4.16-4GB/kernel/sound/pci/snd-via686.o
> snd_id=card1 snd_index=0
> Using /lib/modules/2.4.16-4GB/kernel/sound/pci/snd-via686.o
> /lib/modules/2.4.16-4GB/kernel/sound/pci/snd-via686.o: init_module: No such
> device
> Hint: insmod errors can be caused by incorrect module parameters, including
> invalid IO or IRQ parameters
> /lib/modules/2.4.16-4GB/kernel/sound/pci/snd-via686.o: insmod
> /lib/modules/2.4.16-4GB/kernel/sound/pci/snd-via686.o failed
> # delete snd-ac97-codec
> # delete snd-mpu401-uart
> # delete snd-rawmidi
> # delete snd-seq-device
> /lib/modules/2.4.16-4GB/kernel/sound/pci/snd-via686.o: insmod snd-via686
> failed
>
> /etc/modules.conf:
> alias char-major-116 snd
> alias char-major-14 soundcore
> options snd snd_cards_limit=1 snd_major=116
> alias snd-card-0 snd-via686
> options snd-via686 snd_id=card1 snd_index=0
^^^^
Strange as it may seem I found this:
--------------------------------------------------------------------------
From: Takashi Iwai <[EMAIL PROTECTED]>
To: ephemeron <[EMAIL PROTECTED]>
Cc: [EMAIL PROTECTED]
Subject: Re: [Alsa-user] alsa configuration for 0.9+0beta12
Date: Fri, 12 Apr 2002 10:42:44 +0200
Sender: [EMAIL PROTECTED]
User-Agent: Wanderlust/2.6.1 (Upside Down) SEMI/1.14.3 (Ushinoya)
FLIM/1.14.3 (Unebigory�mae) APEL/10.2 MULE XEmacs/21.4
(patch 4) (Artificial Intelligence) (i386-suse-linux)
At Fri, 12 Apr 2002 10:18:07 +0800,
ephemeron wrote:
>
> After upgrading to 0.9+0beta12 from beta9 (or is it 8 or 10?) I lost my
> ability to have alsa start successfully at boot time. I suspect it has
> something to do with the renaming of snd-card-[CARDNAME] to
> snd-[CARDNAME]:
yes. "snd-card-ymfpci" -> "snd-ymfpci" would be enough.
generally, another possible change is that you cannot use a snd_id
starting with "card", but that is not your case.
Takashi
---------------------------------------------------------------------------
> #
> alias sound-slot-0 snd-card-0
> alias sound-service-0-0 snd-mixer-oss
> alias sound-service-0-1 snd-seq-oss
> alias sound-service-0-3 snd-pcm-oss
> alias sound-service-0-8 snd-seq-oss
> alias sound-service-0-11 snd-mixer-oss
> alias sound-service-0-12 snd-pcm-oss
>
> with this preferences alsa 0.5.12a was running
>
> My system: Board AK74-EC, Kernel 2.4.16, Suse 7.2
>
> Knows anybody whats wrong?
>
> Frank
HTH,
-Frans
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
