> Looks like you have a win modem. The driver for that is closed source
> but you can find it on the web at
> http://www.linmodems.org/
> It is a fairly straightforward procedure.
......
> 00:0b.0 Multimedia audio controller: Rockwell International: Unknown device
4310
> Subsystem: Risq Modular Systems, Inc.: Unknown device 4310
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
> Latency: 32
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at b800 [size=64]
> Capabilities: [40] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 00: 7a 12 10 43 07 00 90 02 00 00 01 04 00 20 80 00
> 10: 01 b8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 35 12 10 43
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
>
> 00:0b.1 Communication controller: Rockwell International: Unknown device 4311
> Subsystem: Risq Modular Systems, Inc.: Unknown device 4311
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
> Latency: 32
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=64K]
> Capabilities: [40] Power Management version 1
> Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 00: 7a 12 11 43 07 00 90 02 00 00 80 07 00 20 80 00
> 10: 00 00 00 de 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 35 12 11 43
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
>
> 00:0b.2 Input device controller: Rockwell International: Unknown device 4312
> Subsystem: Risq Modular Systems, Inc.: Unknown device 4312
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Region 0: Memory at dd800000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [40] Power Management version 1
> Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 00: 7a 12 12 43 07 00 90 02 00 00 80 09 00 00 80 00
> 10: 00 00 80 dd 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 35 12 12 43
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 00 00
>
You can probably forget about using it with ALSA. I have talked to people at
both HP and Conexant (that's
who manufactures the Rockwell part, subsidiary/subdivision... of Rockwell) and
they refuse to release any
documentation. The guy at Conexant (if I recall correctly, he was the sales guy
for the part) said that the part in
my HP was an OEM part (read, we won't tell you anything; talk to HP ... who also
won't tell you anything) and is
now discontinued, as well.
Very disappointing!
Darryl DeGraff
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
