# $Id: pnpdump.c,v 1.21 1999/12/09 22:28:33 fox Exp $
# Release isapnptools-1.21 (library isapnptools-1.21)
# 
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
# 
# For details of the output file format, see isapnp.conf(5)
# 
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
# 
# Compiler flags:  -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
# (for   library:  -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR)
# 
# Trying port address 0273
# Board 1 has serial identifier 1d 97 b0 3c 58 36 a8 63 0e

# (DEBUG)
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier 1d 97 b0 3c 58 36 a8 63 0e)
# Vendor Id CSCa836, Serial Number 2544909400, checksum 0x1D.
# Version 1.0, Vendor version 1.0
# ANSI string -->AudioSystem EWS64<--
#
# Logical device id CSCa800
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3d
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE CSCa836/2544909400 (LD 0
#     ANSI string -->CoDec<--

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       IRQ 5.
#             High true, edge sensitive interrupt (by default)
 (INT 0 (IRQ 5 (MODE +E)))
#       First DMA channel 1.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type B
 (DMA 0 (CHANNEL 1))
#       Next DMA channel 0.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type B
 (DMA 1 (CHANNEL 0))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0534
#             Maximum IO base address 0x0534
#             IO base alignment 4 bytes
#             Number of IO addresses required: 4
 (IO 0 (SIZE 4) (BASE 0x0534))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x0388
#             IO base alignment 8 bytes
#             Number of IO addresses required: 4
 (IO 1 (SIZE 4) (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0220
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
 (IO 2 (SIZE 16) (BASE 0x0220))

#     End dependent functions
 (NAME "CSCa836/2544909400[0]{CoDec               }")
 (ACT Y)
))
#
# Logical device id CSCa801
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3b
#     Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE CSCa836/2544909400 (LD 1
#     ANSI string -->Game Port<--

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0201
#             Maximum IO base address 0x0201
#             IO base alignment 1 bytes
#             Number of IO addresses required: 1
 (IO 0 (SIZE 1) (BASE 0x0201))

#     End dependent functions
 (NAME "CSCa836/2544909400[1]{Game Port           }")
 (ACT Y)
))
#
# Logical device id CSCa810
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3b
#     Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE CSCa836/2544909400 (LD 2
#     ANSI string -->CTRL<--

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0538
#             Maximum IO base address 0x0538
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
 (IO 0 (SIZE 8) (BASE 0x0538))

#     End dependent functions
 (NAME "CSCa836/2544909400[2]{CTRL                }")
 (ACT Y)
))
#
# Logical device id CSCa8a3
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3b
#     Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE CSCa836/2544909400 (LD 3
#     ANSI string -->Disabled [MIDI-2]<--
 (NAME "CSCa836/2544909400[3]{Disabled [MIDI-2]   }")
# (ACT Y)
))
#
# Logical device id CSC9407
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3b
#     Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE CSCa836/2544909400 (LD 4
#     ANSI string -->Synth<--

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       IRQ 9.
#             High true, edge sensitive interrupt (by default)
 (INT 0 (IRQ 9 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0330
#             Maximum IO base address 0x0330
#             IO base alignment 8 bytes
#             Number of IO addresses required: 4
 (IO 0 (SIZE 4) (BASE 0x0330))

#     End dependent functions
 (NAME "CSCa836/2544909400[4]{Synth               }")
 (ACT Y)
))
#
# Logical device id CSCa805
#     Device supports vendor reserved register @ 0x39
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3b
#     Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE CSCa836/2544909400 (LD 5
#     ANSI string -->Digital CTRL<--

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0100
#             Maximum IO base address 0x03f8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 1
 (IO 0 (SIZE 1) (BASE 0x0100))

#     End dependent functions
 (NAME "CSCa836/2544909400[5]{Digital CTRL        }")
 (ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)
