I can, as there is a switch for phono or line on each channel, and each has
2 sets of sockets, one for line, and the other set for phono.
Simon
----- Original Message -----
From: "Barry Chapman" <[email protected]>
To: <[email protected]>
Sent: Saturday, September 12, 2020 12:42 AM
Subject: Re: [all-audio] line to phono level adaptor?
Hi Simon,
Many mixers have alternative microphone and line or phono and line inputs
for some channels. What is usually the case is that you can use one or the
other, but not both together. So if you have a four channel mixer, you
probably can't use both the line input and phono input on the same
channel.
Therefore, what you want to do probably wouldn't work.
Regards,
Barry Chapman
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
goshawk
on horseback
Sent: Saturday, 12 September 2020 9:13 AM
To: [email protected]
Subject: [all-audio] line to phono level adaptor?
Importance: High
hello all,
does anyone know if there is any bit of kit out there which would let one
plug a line level source, in to a phono level channel?
I have a nice mixer, that has 4 channels which have both line and phono
inputs, but on which I use mainly line level sources. so if I could get
something that would let me use line level sources on the phono inputs, it
would mean that I would have 8 sets of inputs available, rather than just
4,
hope that makes sense.
Simon
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3647): https://groups.io/g/all-audio/message/3647
Mute This Topic: https://groups.io/mt/76791319/21656
Group Owner: [email protected]
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
