Rev C are currently in production with Rev D within a month.
Rev C has the improved RF interference bypass and the POE sync glitch absorber.
The Rev D is a mechanical change only. 100% surface mount.
If you think one of our surge suppressors is possibly suspect in any link
issues, we will always do a free upgrade.
On Thu, Oct 20, 2016 at 2:47 PM, Josh Luthman <[email protected]>
wrote:
All of mine are A.1 in the office. The truck is almost certainly older,
but I haven't looked at them with my own eyes.
Can I just RMA a whole bunch of A.1 and get D.1? I'll buy the D.1 and
then you can do whatever you want with A.1, I just want to avoid any ethernet
link issues.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Oct 20, 2016 at 2:37 PM, <[email protected]> wrote:
Yes, you want rev C or D.
Nothing wrong with A & B but something odd is happening with ePMP and
POE sync. We know what the POE sync issues is and have solved that. But ePMP
still has some goofiness that we have not figured out but the fix for POE sync
seems to also cure the ePMP problem.
From: Josh Luthman
Sent: Thursday, October 20, 2016 12:33 PM
To: [email protected]
Subject: Re: [AFMUG] ePMP Sync AP only doing 10 meg
Definitely not. These spares are absolutely more than 4 weeks. Do
they have the rev written on them?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Oct 20, 2016 at 2:30 PM, <[email protected]> wrote:
Are these ones that I have sent you very recently? (Like in the last
4 weeks). If not then they don’t have the new rev.
From: Josh Luthman
Sent: Thursday, October 20, 2016 12:28 PM
To: [email protected]
Subject: Re: [AFMUG] ePMP Sync AP only doing 10 meg
That's the box, yes.
I've got new GIGEHV cards to try, just sent a guy out there to swap
that out and see what happens. Next step would be the line/radio but it's
raining for days at this point...
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Oct 20, 2016 at 2:16 PM, <[email protected]> wrote:
OK, so it is a card that slides into the 4 position metal box?
I’ll send you a new one to try.
From: Josh Luthman
Sent: Thursday, October 20, 2016 12:14 PM
To: [email protected]
Subject: Re: [AFMUG] ePMP Sync AP only doing 10 meg
Your metal box, indoors. Tied to the same ground as everything
else coming in to the building (A LOT).
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Oct 20, 2016 at 2:10 PM, <[email protected]> wrote:
I have a new rev of the GigE HV products. Is this plugged into
an APC rack or is it in an outdoor box?
The new design calms down goofiness like this on some circuits.
From: Josh Luthman
Sent: Thursday, October 20, 2016 12:08 PM
To: [email protected]
Subject: Re: [AFMUG] ePMP Sync AP only doing 10 meg
No. Mikrotiks don't do POE sync.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Oct 20, 2016 at 2:06 PM, <[email protected]> wrote:
Is it POE sync?
From: Josh Luthman
Sent: Thursday, October 20, 2016 12:00 PM
To: [email protected]
Subject: [AFMUG] ePMP Sync AP only doing 10 meg
I have an AP that we put up last year. It ran just fine until
a few months ago. About once a week I could simply reboot and it would go from
10 meg to 100. Now for the last day or two it's stuck at 10 meg. Plugging in
to an rb2011 and WB GIGE HV card. The weird thing is that the Mikrotik is
showing that the link partner is only advertising 10full or 10half. Does this
mean it has to be the line/SS card or can it be the radio itself?
Has anyone seen this kind of behavior before?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
