Thanks for the reply. Maybe I'm confused on the part then. I though
that UGPS and cnPulse were the same. Is there a UGPS that is different
than cnpulse?
I have part C000000L066B which I guess is the cnPulse. I have tested it
with a 450 radio with the RJ45toRJ12 cable and it works fine. I just
wanted to make sure that I hook it up to my 450M radio correctly.
Sounds like it just needs a straight through RJ45 cable, 450M Aux to
cnPulse Aux to make that work?
Nate
On 3/22/2021 12:04 PM, Matt Mangriotis via AF wrote:
Nate - If you're connecting to UGPS, then use this:
https://community.cambiumnetworks.com/t/cable-diagram-for-450i-and-450m-to-ugps/44663
If you really mean the cnPulse device (that has RJ-45 ports), then it's a
straight through Ethernet cable...
There's some good information on this device in the knowledge base here:
https://community.cambiumnetworks.com/c/knowledge-base/cnpulse/19
Thanks,
Matt
-----Original Message-----
From: AF <[email protected]> On Behalf Of Nate Burke
Sent: Monday, March 22, 2021 10:46 AM
To: Animal Farm <[email protected]>
Subject: [ External ] [AFMUG] 450M to UGPS Cable
I'm searching through the Canopy bible, but I must be missing the exact answer.
To connect a 450M to the UGPS on the AUX port, it's just a straight through
RJ45 to RJ45 cable?
I find the Pinout on page 197 for the other 450 Radios with the RJ12 to RJ45,
but I don't find where it explicitly states that the 450M to UGPS Timing cable
is a straight or crossed cable.
--
AF mailing list
[email protected]
https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Faf.afmug.com%2Fmailman%2Flistinfo%2Faf_af.afmug.com&data=04%7C01%7Cmatt.mangriotis%40cambiumnetworks.com%7Cff549b073f64412e154708d8ed4a45d7%7C0e263e36340946228ac818d993e76eb6%7C0%7C0%7C637520250551422651%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=w3VmG55Kk%2BwTdUIolFVZPvkzJOC2dnAoHewcReR%2F%2Fok%3D&reserved=0
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com