Any chance your radio manufacturer sells an adapter from whatever mount is 
already on the antennas?  Like we have gone the opposite way, we had some 
existing antennas with Remec circular because the original radios were Trango 
Apex Plus, and we got a Remec-to-Ceragon adapter through Cambium.

 

For a 2 ft dish I would maybe just replace the dish, for 3 ft and above it’s 
maybe worthwhile trying to use what’s there.  Depending on how much you enjoy 
mounting dishes on towers.

 

From: AF <[email protected]> On Behalf Of Jason McKemie
Sent: Thursday, December 10, 2020 4:53 PM
To: AnimalFarm Microwave Users Group <[email protected]>
Subject: Re: [AFMUG] Commscope Valuline Remec

 

Yes, they do. I wish I had gone with them initially. I'm looking to use some 
antennas that are already in the air for this particular link. Apparently 
Commscope completely stopped making Remec mounts for their antennas.

On Thursday, December 10, 2020, Ken Hohhof <[email protected] 
<mailto:[email protected]> > wrote:

Does Radiowaves make what you need?  They are more expensive but we usually 
like their mechanical design better and they tend to need less assembly work.  
Wish they had provisions for a stiff arm on the smaller dishes though.

 

From: AF <[email protected] <mailto:[email protected]> > On Behalf 
Of Jason McKemie
Sent: Thursday, December 10, 2020 4:08 PM
To: AnimalFarm Microwave Users Group <[email protected] <mailto:[email protected]> >
Subject: Re: [AFMUG] Commscope Valuline Remec

 

Thanks, that's disappointing. I like the antennas, but may have to switch 
vendors.

On Thursday, December 10, 2020, Eric Nielsen <[email protected] 
<mailto:[email protected]> > wrote:

Hi Jason,

 

I'm with CommScope. Just checked with the antenna group and they confirmed that 
it has been discontinued due to low volumes.

 

Thanks,

Eric

 

On Thu, Dec 10, 2020 at 11:21 AM Jason McKemie 
<[email protected] <mailto:[email protected]> > 
wrote:

Is anyone out there using a Commscope 11GHz antenna with a remec circular 
interface? Commscope is telling me the interface plate is discontinued, which 
seems strange since I would think it would be a fairly common type. -- 
AF mailing list
[email protected] <mailto:[email protected]> 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to