I'm logged into a Lumina and don't see anything special. I don't think there are any settings, because it's just a managed switch with a stated max frame size.
On Mon, Sep 9, 2019 at 9:34 PM Paul McCall <[email protected]> wrote: > > Natively, without any settings? > > -----Original Message----- > From: AF <[email protected]> On Behalf Of George Skorup > Sent: Monday, September 9, 2019 10:32 PM > To: AnimalFarm Microwave Users Group <[email protected]> > Subject: Re: [AFMUG] MTU settings on CFIP Lumina FODU - v2.71.07 > > I believe the Lumina supports 9600-byte jumbo frames. > > On Mon, Sep 9, 2019 at 8:55 PM Paul McCall <[email protected]> wrote: > > > > We have some SAF CFIP Lumina FODU - v2.71.07 that I am wanting to verify > > the MTU settings on. Looking to make sure that the MTU is 2000 or better. > > > > > > > > Not seeing an option for it in the firmware. I know this is probably old > > firmware but its been running for years so we haven’t messed with it. > > > > > > > > Anybody have insight as to their MTU settings? > > > > > > > > Paul > > > > > > > > Paul McCall, President > > > > Florida Broadband / PDMNet > > > > 658 Old Dixie Highway > > > > Vero Beach, FL 32962 > > > > 772-564-6800 > > > > > > > > -- > > AF mailing list > > [email protected] > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
