I believe what you are looking for is split horizon. https://wiki.mikrotik.com/wiki/Manual:MPLSVPLS#Split_horizon_bridging Essentially "The basic idea of split horizon bridging is to make traffic arriving over some port never be sent out some set of ports" So ports that are in the same bridge group and you do not want traffic forwarded between them then set the horizon value all the same.
On Sat, Sep 7, 2019 at 8:44 PM Paul McCall <[email protected]> wrote: > We are having a network problem. > > > > I have a bridge at a tower that has a bunch of VLANs on it (going up the > tower on fiber to a Fiber/POE switch. I have each AP on a separate VLAN, > but all VLANs are in the "LANBridge". I am having an AP acting up and want > to separate communication between the VLAN's on that bridge > > I could enable IP Firewall on that bridge, but I don't know what the > Firewall rules would be for it to isolate the interfaces (VLANs) on the > bridge > > > > > > *Paul McCall, President * > > *Florida Broadband / PDMNet* > > *658 Old Dixie Highway* > > *Vero Beach, FL 32962* > > *772-564-6800* > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- -Louis NTInet O: 803-533-1660 X 207 C: 803-997-0004
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
